Le dernier examen Microsoft 98-366 gratuit Télécharger

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft 98-366, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Après une longue attente, les documentations de test Microsoft 98-366 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 98-366 à la première fois.

Code d'Examen: 98-366
Nom d'Examen: Microsoft (MTA Networking Fundamentals)
Questions et réponses: 185 Q&As

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft 98-366. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

98-366 Démo gratuit à télécharger: http://www.pass4test.fr/98-366.html

NO.1 Which of the following devices is required for remotely accessing the network through PSTN lines?
A. Hub
B. Bridge
C. Switch
D. Modem
E. Gateway
F. Router
Answer: D

Microsoft   certification 98-366   certification 98-366   98-366   98-366

NO.2 Which of the following statements are true about a UTP crossover cable with RJ-45 connectors?
Each correct answer represents a complete solution. Choose two.
A. It is used for establishing a connection between a telephone line and a modem.
B. It is used for troubleshooting a network card.
C. It is used for establishing a connection between a broadband modem and a PC/router.
D. It is used for establishing a connection between two PCs without a hub.
Answer: C,D

certification Microsoft   98-366   98-366 examen   98-366

NO.3 In the FDDI network, each network node is connected to a central cabling nexus called a ____.
A. Concentrator
B. Gateway
C. Repeater
D. Transceiver
E. NIC
F. Bridge
Answer: A

Microsoft examen   98-366   98-366 examen   98-366 examen   98-366

NO.4 Which of the following services is required in a routed network to communicate with the DHCP
server on another segment?
A. DHCP
B. RIS
C. DNS
D. DHCP relay agent
E. WINS
Answer: D

Microsoft   98-366   98-366   98-366 examen   98-366

NO.5 You work as a technician for Net Perfect Inc. You are troubleshooting a connectivity issue on a
network. You are using the ping command to verify the connectivity between two hosts. You want ping to
send larger sized packets than the usual 32-byte ones. Which of the following commands will you use?
A. ping -a
B. ping -4
C. ping -l
D. ping -t
Answer: C

Microsoft   98-366   98-366   98-366   98-366 examen

NO.6 You work as a consultant for Tech Perfect Inc. You are required to design a gigabit network for the
company. Which of the following types of cables will you use for the network?
A. CAT 3
B. CAT 4
C. CAT 5
D. CAT 6
Answer: D

Microsoft   98-366   certification 98-366   certification 98-366   98-366

NO.7 Which of the following utilities will produce the output as shown in the image below?
A. NBTSTAT
B. IPCONFIG
C. PING
D. NETSTAT
Answer: B

Microsoft   98-366 examen   98-366   certification 98-366   98-366 examen

NO.8 Which of the following items are configured on a user workstation for wireless networking?
Each correct answer represents a complete solution. Choose two.
A. MAC Address Filtering
B. Service Set Identifier (SSID)
C. Encryption
D. Security Set Identifier (SSID)
Answer: B,C

Microsoft examen   98-366   98-366

NO.9 You work as a Web Developer for WebCrunch Inc. You create a web site that contains information
about the company's products and services. The web site is to be used by the company's suppliers only.
Which of the following options will you use to specify the nature of access to the web site?
A. Intranet
B. Internet
C. Internet and Intranet
D. Extranet
Answer: D

Microsoft   certification 98-366   certification 98-366   98-366   98-366

NO.10 Identify whether the given statement is true or false.?
"A switch passes data based on the MAC address."
A. True
B. False
Answer: A

certification Microsoft   98-366   98-366   98-366 examen   98-366

NO.11 The ____ layer provides access to the network for applications and certain user functions. It
displays incoming information and prepares outgoing information for network access.
A. Transport
B. Network
C. Physical
D. Session
E. Data-link
F. Application
Answer: F

Microsoft examen   certification 98-366   98-366   98-366 examen   98-366

NO.12 Which of the following types of patch cable is used in a 100BaseT network?
A. Cat 3 STP
B. Cat 3 UTP
C. RJ 58 Coaxial
D. Cat 5 UTP
Answer: D

Microsoft   98-366   98-366

NO.13 You work as a Network Administrator for McNeil Inc. The company has a TCP/IP-based network. The
company's office has an ISDN connection. This connection is used to connect the network to the Internet.
How many channels does an ISDN BRI connection use to send data?
A. 2
B. 4
C. 6
D. 1
Answer: A

Microsoft examen   certification 98-366   98-366   98-366

NO.14 Which of the following functions is not performed by a router?
A. Internetwork communication
B. Broadcast forwarding
C. Packet filtering
D. Packet switching
Answer: B

Microsoft examen   98-366 examen   98-366

NO.15 You work as a Network Administrator for McRobert Inc. Your company has a TCP/IP-based network.
You want to know the statistics of each protocol installed on your computer. Which of the following
commands will you use?
A. NETSTAT -r
B. NBTSTAT -s
C. NBTSTAT -r
D. NETSTAT -s
Answer: Pending

Microsoft   98-366   98-366   98-366

NO.16 You work as a Network Administrator for McNeil Inc. The company has a TCP/IP-based network. You
are configuring an Internet connection for your company. Your Internet service provider (ISP) has a
UNIX-based server. Which of the following utilities will enable you to access the UNIX server, using a
text-based connection?
A. TELNET
B. TRACERT
C. IPCONFIG
D. FTP
E. PING
Answer: A

Microsoft   98-366   98-366

NO.17 Identify whether the given statement is true or false.
"In a bus topology, when a computer transmits its data, the signals travel in both directions on the bus
until they reach both ends."
A. False
B. True
Answer: B

certification Microsoft   98-366   98-366 examen   98-366   98-366

NO.18 You work as a Network Administrator for Tech Perfect Inc. The company has a TCP/IP-based network.
You are required to set up a new network in a department named Research. The department's network
will be configured with IPv6.
Place the appropriate properties of the IPv6 multicast address structure in the image below.
A.
Answer: A

certification Microsoft   certification 98-366   98-366 examen   98-366

NO.19 Which of the following utilities will produce the output as shown in the image below?
A. PING
B. NETSTAT
C. TRACERT
D. NBTSTAT
Answer: A

Microsoft examen   98-366   98-366   98-366

NO.20 Which of the following are functions of the application layer of the OSI model?
Each correct answer represents a complete solution. Choose three.
A. To provide a user interface for database services
B. To provide protocols for service use
C. To provide protocols for service advertisement
D. To provide file, print, and message services
Answer: B,C,D

certification Microsoft   98-366   98-366   certification 98-366

NO.21 You work as a Web Designer for Blue Well Inc. You have to create a Web site for the company. The
Web site will be for internal use only and will contain information about policies and procedures of the
company. What will be the scope of the Web site?
A. Extranet
B. Internet
C. Utilitarian
D. Intranet
Answer: D

Microsoft examen   98-366   98-366

NO.22 Which of the following cables offers more resistance to crosstalk than the other cables?
A. Unshielded twisted pair
B. Fiber-optic
C. Coaxial
D. Shielded twisted pair
Answer: B

Microsoft   98-366 examen   98-366 examen   98-366 examen   98-366 examen

NO.23 Which of the following devices is used to create VLANs in a small network?
A. Switch
B. Bridge
C. Hub
D. Repeater
Answer: A

Microsoft examen   98-366 examen   98-366 examen

NO.24 Which of the following statements is true regarding hybrid network topology?
A. It is a combination of more than two similar networks connected through routers.
B. It is a combination of two or more similar types of networks connected through a bridge de vice.
C. It is a combination of two or more different types of networks topologies.
D. It is a network that uses both coaxial and CAT 5 cabling.
Answer: D

Microsoft   98-366   98-366   certification 98-366

NO.25 PRI, a form of ISDN, can provide transmission rates of up to ____.
A. 1.544Mbps
B. 16Kbps
C. 128Kbps
D. 64Kbps
Answer: Pending

Microsoft   98-366   certification 98-366   98-366

NO.26 Which of the following statements is true regarding VLAN?
A. It increases the number of interfaces available to the network.
B. It is applied in case of RIP routing.
C. It configures permissions across the network.
D. It enables the user to map port number.
Answer: A

certification Microsoft   98-366   98-366   certification 98-366

NO.27 Which of the following standards uses twisted pair cabling?
A. 10Base5
B. 10BaseT
C. 100BaseSX
D. 100BaseFX
Answer: B

Microsoft examen   98-366   98-366 examen   98-366 examen

NO.28 Which of the following is a function of a WINS server on a network?
A. Assigning virtual memory to the server.
B. Assigning IP addresses.
C. Converting host names to domain names.
D. Converting NetBIOS names to IP addresses.
E. Assigning computer names.
Answer: D

Microsoft   98-366   certification 98-366   certification 98-366

NO.29 Identify whether the given statement is true or false.
"In a segmented network, the router prevents broadcasts from being transferred from one
segment to another."
A. True
B. False
Answer: A

certification Microsoft   98-366 examen   98-366   98-366

NO.30 You work as a Network Administrator for Tech Perfect Inc. The company has a TCP/IP-based routed
network. The network is configured on Cisco devices. The network is configured as shown in the image
below:
Following is a list of the types of cable used in networking:
Which of the following options is correct regarding the types of cable used for connecting different
networking devices on the network?
A. A-4, B-3, C-2, D-1
B. A-3, B-1, C-1, D-4
C. A-1, B-2, C-3, D-4
D. A-2, B-1, C-4, D-3
Answer: B

Microsoft   98-366   98-366 examen

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Microsoft 98-366 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Microsoft MB3-861, de formation et d'essai

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Microsoft MB3-861, la voie à la réussite de votre professionnel sera ouverte pour vous.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Microsoft MB3-861. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Microsoft MB3-861. Choisir le produit de Pass4Test particulier pour le test Certification Microsoft MB3-861 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Microsoft MB3-861, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Microsoft MB3-861 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Microsoft MB3-861 sans aucune doute.

Le test Microsoft MB3-861 est l'un très improtant dans tous les tests de Certification Microsoft, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Code d'Examen: MB3-861
Nom d'Examen: Microsoft (Microsoft Dynamics GP 2010 Installation & Configuration)
Questions et réponses: 57 Q&As

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Microsoft MB3-861. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Pass4Test possède un l'outil de formation particulier à propos de test Microsoft MB3-861. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Microsoft MB3-861 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

MB3-861 Démo gratuit à télécharger: http://www.pass4test.fr/MB3-861.html

NO.1 Which of following prerequisites can be installed automatically from the Component Installation window
when installing Microsoft Dynamics GP?
Choose the 2 that apply.
A. Microsoft .Net Framework 3.5
B. Microsoft Dynamics GP Add-In for Microsoft Word
C. Microsoft SQL Server Native Client 10.0
D. Microsoft SQL Server 2008
Answer:AC

certification Microsoft   MB3-861   MB3-861 examen   certification MB3-861

NO.2 Which command is used to view the SQL collation after installation?
A. Dbcc_checkdb
B. Sp_dboption
C. Sp_helpsort
D. Sp_serveroption
Answer:C

Microsoft   certification MB3-861   certification MB3-861   MB3-861

NO.3 What do you need to use gain remote access to Microsoft Dynamics GP?
Choose the 2 that apply.
A. Local Area Network (LAN)
B. Named Pipes
C. Peer to Peer
D. Wide Area Network (WAN)
Answer:AD

Microsoft examen   MB3-861 examen   MB3-861   MB3-861

NO.4 What conditions should exist to send predefined or customize Microsoft Word forms from Microsoft
Dynamics GP?
Choose the 2 that apply.
A. Macros must be enabled in Microsoft Word
B. User sending the documents must belong to the POWERUSERS role
C. The documents must be supported by Microsoft Word templates
D. The documents must be sent from a MAPI compliant email service
Answer:CD

certification Microsoft   MB3-861   MB3-861   MB3-861

NO.5 The installation prerequisites for GP2010 include:
Choose the 2 that apply.
A. Internet Explorer.
B. Microsoft .Net Framework.
C. Microsoft Dexterity Shared Component.
D. SQL Integration Services.
Answer:BC

Microsoft   certification MB3-861   MB3-861   MB3-861

NO.6 What should you install to edit Microsoft Word Templates?
Choose the 2 that apply.
A. Microsoft Dynamics GP Add-in for Microsoft Word
B. Microsoft Dynamics GP Report Writer
C. Microsoft Word 2007 or later
D. SQL Reporting Service
Answer:AC

Microsoft examen   MB3-861 examen   MB3-861   MB3-861   MB3-861 examen   certification MB3-861

NO.7 When installing Microsoft SQL 2008 for use with Microsoft Dynamics GP, you should select:
A. Business Intelligence Development Studio.
B. Client tools Connectivity.
C. Integration Services.
D. SQL server Book Online.
Answer:B

certification Microsoft   MB3-861   MB3-861

NO.8 When configuring service for SQL Server for Microsoft Dynamics GP, it is recommended that you:
Choose the 2 that apply.
A. set all services to start automatically.
B. set all services to start manually.
C. use a different account for each SQL Server service.
D. use the same user account for all SQL Server services.
Answer:AD

Microsoft examen   MB3-861   certification MB3-861   certification MB3-861   MB3-861 examen

NO.9 When installing Microsoft SQL Server what setting should you configure to be compatible with Microsoft
Dynamics GP?
A. Definition
B. Region Code
C. Service Account Setup
D. Sort Order
Answer:D

Microsoft   MB3-861   MB3-861   MB3-861   MB3-861

NO.10 Which command should you use to view the SQL service pack installed on particular instance of SQL?
A. Select @@servername
B. Select @@version
C. Sp_helpdb
D. Sp_helpsort
Answer:C

Microsoft   MB3-861 examen   MB3-861

Vous aurez une assurance 100% à réussir le test Microsoft MB3-861 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Microsoft 70-545-Csharp examen pratique questions et réponses

Passer le test Microsoft 70-545-Csharp, obtenir le Passport peut améliorer la perspective de votre carrière et vous apporter plus de chances à développer votre boulot. Pass4Test est un site très convenable pour les candidats de test Certification Microsoft 70-545-Csharp. Ce site peut offrir les informations plus nouvelles et aussi provider les bonnes chances à se former davantage. Ce sont les points essentiels pour votre succès de test Certification Microsoft 70-545-Csharp.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Microsoft 70-545-Csharp (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft 70-545-Csharp est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft 70-545-Csharp.

Code d'Examen: 70-545-Csharp
Nom d'Examen: Microsoft (TS:Microsoft Visio 2007, Application Development)
Questions et réponses: 54 Q&As

Si vous voulez ne se soucier plus à passer le test Microsoft 70-545-Csharp, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Microsoft 70-545-Csharp. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Microsoft 70-545-Csharp offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-545-Csharp (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-545-Csharp.

70-545-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/70-545-Csharp.html

NO.1 You receive an XML data file and a separate XML schema file. The XML schema file describes the XML
data. You need to load the XML data file into the External Data window. Which two actions should
you perform? (Each correct answer presents part of the solution. Choose two.)
A. Transform the XML data file into the classic ActiveX Data Objects (ADO) RowsetSchema format.
B. Verify that the XML data file is well-formed and uses the namespace
http://schemas.microsoft.com/visio/2006/extension.
C. In a code module, use the DataRecordsets object Add method in the Office Visio 2007 document.
D. In a code module, use the DataRecordsets object AddFromXML method in the Office Visio 2007
document.
Answer: AD

Microsoft   certification 70-545-Csharp   70-545-Csharp

NO.2 You have a drawing that contains custom shape data. You need to export the shape data to a new
Microsoft Office Excel 2007 workbook. What should you do?
A. Use the Database Wizard.
B. Use the Reports command.
C. Use the Export to Database command.
D. Save the file as an XML drawing.
Answer: B

Microsoft examen   70-545-Csharp   certification 70-545-Csharp   70-545-Csharp   certification 70-545-Csharp

NO.3 You plan to create a timeline diagram by using Microsoft Office Project 2007. You need to ensure
that the Project data can be imported into Office Visio 2007 by using the Import Timeline Wizard. What
should you do?
A. In Project, save the data as a Microsoft Project File (*.mpp).
B. In Project, save the data as a Microsoft Project Database (*.mpd).
C. In Project, save the data as a Microsoft Project Workspace (*.mpw).
D. In Project, save the data as a Microsoft Project Exchange (*.mpx).
Answer: A

Microsoft   70-545-Csharp examen   70-545-Csharp

NO.4 An External Data recordset named Computer Inventory contains a column named MachineSN. You
create a new Office Visio 2007 diagram and load the Computers and Monitors stencil. A shape named PC
Master from the Computers and Monitors stencil has a Shape Data row labeled Serial Number. To add
a shape to the Visio 2007 diagram, you select the PC Master shape, and then drag and drop a row from
the External Data window to the Visio 2007 page. You notice that the new shapes Serial Number row is
empty. You need the values from the MachineSN column to be entered automatically into the row
labeled Serial Number when you add the shape. What should you do?
A. Change the name of the External Data recordsets column from MachineSN to Serial Number.
B. Change the name of the External Data recordset from Computer Inventory to Serial Number.
C. Modify the PC Master shape on the document stencil. Change the row name of the shape data row
from Serial Number to MachineSN.
D. Copy the PC Master shape to the document stencil. Change the label of the shape data row from
Serial Number to _visDM_MachineSN.
Answer: A

Microsoft   certification 70-545-Csharp   70-545-Csharp examen   70-545-Csharp   70-545-Csharp   70-545-Csharp examen

NO.5 You create a shape that has two Shape Data rows named Department and CostCode. Both the
Department and the CostCode rows have the Type =1.
The Department row Format cell has the formula =A;B.
You need to modify the ShapeSheet to meet the following requirements:
When a user selects Department A, only CostCodes A1 and A2 are visible.
When a user selects Department B, only CostCodes B1 and B2 are visible.
What should you do?
A. Insert a new user-defined cell and enter the formula =SETF(GetRef(Prop.CostCode.Format), =
INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|"))
B. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2")
C. Enter the following formula in the Format cell of the CostCode Shape Data row.
=""""&INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")&""""
D. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")
Answer: D

Microsoft examen   70-545-Csharp   70-545-Csharp   70-545-Csharp

NO.6 You have a shape that contains a Shape Data row named Grade, where Type=0. You need to modify
the Grade row so that it is visible and read-only within the Shape Data window and the Shape Data dialog
box. What should you do?
A. In the Prop.Grade row, change the value of the Type cell to 9.
B. In the Prop.Grade row, change the value of the Type cell to 1, and the formula in the Format cell to
=Prop.Grade.
C. In the Prop.Grade row, change the formula in the Format cell to =LOCK.
D. Insert a new user-defined cell with the formula =
DEPENDSON(Prop.Grade)+SETF(GetRef(Prop.Grade),Prop.Grade).
Answer: B

Microsoft   70-545-Csharp   70-545-Csharp examen   70-545-Csharp   certification 70-545-Csharp

NO.7 You need to create an organization chart of employees by using a comma-separated values (CSV) file
and the Organization Chart Wizard. Which two columns must the CSV file contain? (Each correct
answer presents part of the solution. Choose two.)
A. A column that uniquely identifies each employee
B. A column that identifies each employees job title
C. A column that contains each employees department
D. A column that identifies who each employee reports to
Answer: AD

Microsoft   certification 70-545-Csharp   certification 70-545-Csharp

NO.8 You need to link a master shape to an ODBC database. The master shape must display the Update
Database Record command when you right-click the shape. What should you do?
A. In Office Visio 2007, run the Database Wizard.
B. From Control Panel, add a new ODBC data source.
C. In Office Visio 2007, run the Database Export Wizard.
D. In Office Visio 2007, run the Export to Database command.
Answer: A

Microsoft   certification 70-545-Csharp   70-545-Csharp examen

NO.9 You need to create two PivotDiagrams in Office Visio 2007 by using the minimum number of Visio
documents and pages. What should you do?
A. Create two new Visio documents by using the PivotDiagram template.
B. Create a new Visio document by using the PivotDiagram template. Insert a PivotDiagram into the
existing page.
C. Create a new Visio document by using the PivotDiagram template. Insert a new page, and then insert
the PivotDiagram into the new page.
D. Create two new Visio documents by using the PivotDiagram template. Copy the PivotDiagram from
one document to a blank page in the other document.
Answer: B

Microsoft   certification 70-545-Csharp   certification 70-545-Csharp   70-545-Csharp examen

NO.10 You have an ODBC database that contains information that you want to display in Office Visio 2007.
You need to update the database records by modifying shape data from Visio 2007. What are three
possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. In Visio, use the Link Data to Shapes command from the Data menu.
B. In Visio, point to Visio Extras, start the Database Wizard, and then click Link shapes to database
records.
C. In Visio, click Import Data on the Plan menu.
D. In Visio, point to Visio Extras and click Link to ODBC Database.
E. Create custom code functions to read data from the data source, update the Shape Data rows, and
then write the data to the data source.
Answer: BDE

Microsoft   70-545-Csharp examen   70-545-Csharp

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 70-545-Csharp juste avec la Q&A de Microsoft 70-545-Csharp offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Dernières Microsoft 070-536-Csharp examen pratique questions et réponses

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft 070-536-Csharp, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft 070-536-Csharp coûtant un peu d'argent.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 070-536-Csharp plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 070-536-Csharp à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 070-536-Csharp sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

Code d'Examen: 070-536-Csharp
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Questions et réponses: 160 Q&As

Si vous faites toujours la lutte contre le test Microsoft 070-536-Csharp, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 070-536-Csharp. Si vous avez déjà décidé à s'améliorer via Microsoft 070-536-Csharp, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

On peut voir que beaucoup de candidats ratent le test Microsoft 070-536-Csharp quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Microsoft 070-536-Csharp est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Microsoft 070-536-Csharp, Pass4Test peut offrir les Q&As des autres test Certification IT.

070-536-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-536-Csharp.html

NO.1 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C

Microsoft   certification 070-536-Csharp   070-536-Csharp   070-536-Csharp   070-536-Csharp

NO.2 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. ArrayList al = new ArrayList();
lock (al.SyncRoot)
{
return al;
}
B. ArrayList al = new ArrayList();
lock (al.SyncRoot.GetType())
{
return al;
}
C. ArrayList al = new ArrayList();
Monitor.Enter(al);
Monitor.Exit(al);
return al;
D. ArrayList al = new ArrayList();
ArrayList sync_al = ArrayList.Synchronized(al);
return sync_al;
Answer: D

Microsoft examen   certification 070-536-Csharp   070-536-Csharp

NO.3 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
public class Department {
public string name;
public string manager;
}
Each application uses a custom configuration section to store department-specific values in the
application configuration file as shown in the following code.
<Department>
<name>Hardware</name>
<manager>Amy</manager>
</Department>
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. public class deptElement : ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = ConfigurationManager.AppSettings["name"];
dept.manager =
ConfigurationManager.AppSettings["manager"];
return dept;
}
}
B. public class deptElement: ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = reader.GetAttribute("name");
dept.manager = reader.GetAttribute("manager");
}
}
C. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.SelectSingleNode("name").InnerText;
dept.manager =
section.SelectSingleNode("manager").InnerText;
return dept;
}
}
D. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.Attributes["name"].Value;
dept.manager = section.Attributes["manager"].Value;
return dept;
}
}
Answer: C

Microsoft examen   070-536-Csharp examen   070-536-Csharp   070-536-Csharp   070-536-Csharp examen   070-536-Csharp

NO.4 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.LoadFrom(myPath);
B. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.Load(myPath);
C. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.DynamicDirectory,
"Assembly1.dll");
Assembly asm = AppDomain.CurrentDomain.Load(myPath);
D. AppDomain domain = AppDomain.CurrentDomain;
Assembly asm = domain.GetData("Assembly1.dll");
Answer: A

Microsoft   070-536-Csharp   070-536-Csharp examen   certification 070-536-Csharp

NO.5 You need to write a code segment that will add a string named strConn to the connection string section
of the application configuration file.
Which code segment should you use?
A. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
myConfig.Save();
B. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
C. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
D. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.Save();
Answer: A

Microsoft   070-536-Csharp   certification 070-536-Csharp   certification 070-536-Csharp   070-536-Csharp examen

NO.6 You are developing an application that stores data about your company's sales and technical support
teams.
You need to ensure that the name and contact information for each person is available as a single
collection when a user queries details about a specific team. You also need to ensure that the data
collection guarantees type safety.
Which code segment should you use?
A. Hashtable team = new Hashtable();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
B. ArrayList team = new ArrayList();
team.Add("1, Hance");
team.Add("2, Jim");
team.Add("3, Hanif");
team.Add("4, Kerim");
team.Add("5, Alex");
team.Add("6, Mark");
team.Add("7, Roger");
team.Add("8, Tommy");
C. Dictionary<int, string> team =
new Dictionary<int, string>();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
D. string[] team =
new string[] {"1, Hance",
"2, Jim", "3, Hanif",
"4, Kerim", "5, Alex",
"6, Mark", "7, Roger",
"8, Tommy"};
Answer: C

Microsoft examen   070-536-Csharp examen   certification 070-536-Csharp   070-536-Csharp

NO.7 You create a class that is derived from the Installer class. The class you create is used to perform a
component installation.
The component installation overwrites the value of a registry key. You create a method named
GetRegValue that returns the current value of the registry key.
You need to add a code segment that preserves the original value of the registry key if the component is
uninstalled.
Which code segment should you use?
A. private void BeforeUninstallEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
B. private void CommittedEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
C. public override void Uninstall(
IDictionary savedState) {
base.Uninstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
D. protected override void OnBeforeInstall(
IDictionary savedState) {
base.OnBeforeInstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
Answer: D

Microsoft examen   certification 070-536-Csharp   070-536-Csharp

NO.8 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
<ProjectSection name="Project1">
<role name="administrator" />
<role name="manager" />
<role name="support" />
</ProjectSection>
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. public class Role : ConfigurationElement {
internal string _ElementName = "name";
[ConfigurationProperty("role")]
public string Name {
get {
return ((string)base["role"]);
}
}
}
B. public class Role : ConfigurationElement {
internal string _ElementName = "role";
[ConfigurationProperty("name", RequiredValue = true)]
public string Name {
get {
return ((string)base["name"]);
}
}
}
C. public class Role : ConfigurationElement {
internal string _ElementName = "role";
private string _name;
[ConfigurationProperty("name")]
public string Name {
get {
return _name;
}
}
}
D. public class Role : ConfigurationElement {
internal string _ElementName = "name";
private string _name;
[ConfigurationProperty("role", RequiredValue = true)]
public string Name {
get {
return _name;
}
}
}
Answer: B

Microsoft examen   070-536-Csharp   070-536-Csharp   certification 070-536-Csharp   070-536-Csharp examen

NO.9 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. public class Age {
public int Value;
public object CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(obj);
}
throw new ArgumentException("object not an Age");
}
}
B. public class Age {
public int Value;
public object CompareTo(int iValue) {
try {
return Value.CompareTo(iValue);
} catch {
throw new ArgumentException ("object not an Age");
}
}
}
C. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(_age.Value);
}
throw new ArgumentException("object not an Age");
}
}
D. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
try {
return Value.CompareTo(((Age) obj).Value);
} catch {
return -1;
}
}
}
Answer: C

Microsoft   070-536-Csharp   070-536-Csharp examen   070-536-Csharp

NO.10 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
è Initialize each answer to true.
è Minimize the amount of memory used by each survey.
Which storage option should you choose?
A. BitVector32 answers = new BitVector32(1);
B. BitVector32 answers = new BitVector32(-1);
C. BitArray answers = new BitArray (1);
D. BitArray answers = new BitArray(-1);
Answer: B

Microsoft   070-536-Csharp   certification 070-536-Csharp   070-536-Csharp

NO.11 You are creating a class named Temperature. The Temperature class contains a public field named F.
The public field F represents a temperature in degrees Fahrenheit.
You need to ensure that users can specify whether a string representation of a Temperature instance
displays the Fahrenheit value or the equivalent Celsius value.
Which code segment should you use?
A. public class Temperature : IFormattable {
public int F;
public string ToString(string format, IFormatProvider fp) {
if ((format == "F")|| (format == null)) return F.ToString();
if (format == "C") return ((F - 32) / 1.8).ToString();
throw new FormatException("Invalid format string");
}
}
B. public class Temperature : ICustomFormatter {
public int F;
public string Format(string format, object arg,
IFormatProvider fp) {
if (format == "C") return ((F - 32) / 1.8).ToString();
if (format == "F") return arg.ToString();
throw new FormatException("Invalid format string");
}
}
C. public class Temperature {
public int F;
public string ToString(string format, IFormatProvider fp) {
if (format == "C") {
return ((F - 32) / 1.8).ToString();
} else {
return this.ToString();
}
}
}
D. public class Temperature {
public int F;
protected string format;
public override String ToString() {
if (format == "C")
return ((F - 32) / 1.8).ToString();
return F.ToString();
}
}
Answer: A

Microsoft examen   070-536-Csharp examen   070-536-Csharp examen

NO.12 You need to write a code segment that will assign the name of the configuration file that the current
application domain uses to a string variable named configFile.
Which two code segments should you use to achieve the goal? (Each correct answer presents a
complete solution. Choose two.)
A. AppDomain domain = AppDomain.CurrentDomain;
configFile =
domain.GetData("APP_CONFIG_FILE").ToString();
B. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = domain.SetupInformation;
configFile = setup.ConfigurationFile;
C. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = new AppDomainSetup();
configFile = setup.ConfigurationFile;
D. AppDomainSetup setup = new AppDomainSetup();
AppDomain domain = AppDomain.CreateDomain("current",
null, setup);
configFile = setup.ConfigurationFile;
Answer: AB

Microsoft   070-536-Csharp   070-536-Csharp examen   070-536-Csharp   070-536-Csharp

NO.13 You are instantiating a variable to store only strings. The variable is named messageStore.
You need to ensure that string messages are read and processed in the order in which they are received.
Which code segment should you use?
A. Stack<string> messageStore = new Stack<string>();
messageStore.Push("This is a test message...");
B. Stack messageStore = new Stack();
messageStore.Push("This is a test message...");
C. Queue messageStore = new Queue();
messageStore.Enqueue("This is a test message...");
D. Queue<string> messageStore = new Queue<string>();
messageStore.Enqueue("This is a test message...");
Answer: D

Microsoft   070-536-Csharp   certification 070-536-Csharp   certification 070-536-Csharp   070-536-Csharp

NO.14 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. AppDomainSetup mySetup =
AppDomain.CurrentDomain.SetupInformation;
mySetup.ShadowCopyFiles = "true";
B. System.Diagnostics.Process myProcess;
myProcess = new System.Diagnostics.Process();
C. AppDomain domain;
domain = AppDomain.CreateDomain("MyDomain");
D. System.ComponentModel.Component myComponent;
myComponent = new System.ComponentModel.Component();
Answer: C

Microsoft   certification 070-536-Csharp   070-536-Csharp   070-536-Csharp   070-536-Csharp

NO.15 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t =
new Dictionary<string, string>();
MyDictionary dictionary = (MyDictionary)t;
Answer: A

Microsoft examen   certification 070-536-Csharp   070-536-Csharp examen   070-536-Csharp   certification 070-536-Csharp

NO.16 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. public delegate int PowerDeviceOn(bool result,
DateTime autoPowerOff);
B. public delegate bool PowerDeviceOn(object sender,
EventArgs autoPowerOff);
C. public delegate void PowerDeviceOn(DateTime autoPowerOff);
D. public delegate bool PowerDeviceOn(DateTime autoPowerOff);
Answer: C

Microsoft   070-536-Csharp   070-536-Csharp   070-536-Csharp

NO.17 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ThreadStart(PerformCalculation));
newThread.Start(myValues);
}
B. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
ThreadStart delStart = new
ThreadStart(PerformCalculation);
Thread newThread = new Thread(delStart);
if (newThread.IsAlive) {
newThread.Start(myValues);
}
}
C. private void PerformCalculation (CalculationValues values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Application.DoEvents();
PerformCalculation(myValues);
Application.DoEvents();
}
D. private void PerformCalculation(object values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ParameterizedThreadStart(PerformCalculation));
newThread.Start(myValues);
}
Answer: D

Microsoft   070-536-Csharp   070-536-Csharp   certification 070-536-Csharp   certification 070-536-Csharp

NO.18 You write the following code.
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs {
private string coverPageInfo;
public FaxArgs(string coverInfo) {
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
D. public class FaxArgs : EventArgs {
private string coverPageInfo;
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
Answer: A

certification Microsoft   070-536-Csharp   070-536-Csharp examen   070-536-Csharp   070-536-Csharp

NO.19 You are developing a routine that will periodically perform a calculation based on regularly changing
values from legacy systems. You write the following lines of code. (Line numbers are included for
reference only.)
01 bool exitLoop = false;
02 do {
03
04 exitLoop = PerformCalculation();
05 } while (!exitLoop);
You need to write a code segment to ensure that the calculation is performed at 30-second intervals. You
must ensure that minimum processor resources are used between the calculations.
Which code segment should you insert at line 03?
A. Thread.Sleep(30000);
B. Thread.SpinWait(30000);
C. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.BelowNormal;
D. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.Lowest;
E. Thread.SpinWait(30);
Answer: A

Microsoft examen   070-536-Csharp   070-536-Csharp

NO.20 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
01 public void StartService(string serverName){
02 ServiceController crtl = new
03 ServiceController("FileService");
04 if (crtl.Status == ServiceControllerStatus.Stopped){
05 }
06 }
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName;
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName;
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName;
D. Insert the following line of code between lines 04 and 05:
crtl.Continue();
E. Insert the following line of code between lines 04 and 05:
crtl.Start();
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0);
Answer: BE

certification Microsoft   070-536-Csharp   070-536-Csharp examen   070-536-Csharp   070-536-Csharp examen

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Microsoft 070-536-Csharp. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Microsoft 070-536-Csharp. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Le plus récent matériel de formation Microsoft 70-576-Csharp

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Microsoft 70-576-Csharp, et aussi une meilleure assurance du succès du test 70-576-Csharp. Vous choisissez Pass4Test, vous choisissez le succès.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Microsoft 70-576-Csharp, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Microsoft 70-576-Csharp. Vous aurez une space plus grande à se développer.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Microsoft 70-576-Csharp comme votre guide d'étude.

Code d'Examen: 70-576-Csharp
Nom d'Examen: Microsoft (PRO: Designing and Developing Microsoft SharePoint 2010 Applications)
Questions et réponses: 150 Q&As

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 70-576-Csharp juste avec la Q&A de Microsoft 70-576-Csharp offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Le test certification Microsoft 70-576-Csharp est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Microsoft 70-576-Csharp puisse augmenter la compétition dans ce marché.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Microsoft 70-576-Csharp soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Microsoft 70-576-Csharp est le rêve pour les professionnels ambitieux.

70-576-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/70-576-Csharp.html

Avec la version plus nouvelle de Q&A Microsoft 70-576-Csharp, réussir le test Microsoft 70-576-Csharp n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Microsoft 70-513-Csharp examen pratique questions et réponses

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 70-513-Csharp plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 70-513-Csharp à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 70-513-Csharp sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Microsoft 70-513-Csharp peut vous assurer à réussir 100% le test Microsoft 70-513-Csharp. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Votre vie changera beaucoup après d'obtenir le Certificat de Microsoft 70-513-Csharp. Tout va améliorer, la vie, le boulot, etc. Après tout, Microsoft 70-513-Csharp est un test très important dans la série de test Certification Microsoft. Mais c'est pas facile à réussir le test Microsoft 70-513-Csharp.

Code d'Examen: 70-513-Csharp
Nom d'Examen: Microsoft (Windows Communication Foundation Development with Microsoft C#.NET Framework 4)
Questions et réponses: 136 Q&As

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Microsoft 70-513-Csharp, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 70-513-Csharp à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 70-513-Csharp est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Selon les anciens test Microsoft 70-513-Csharp, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Il y a nombreux façons à vous aider à réussir le test Microsoft 70-513-Csharp. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Microsoft 70-513-Csharp est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Microsoft 70-513-Csharp peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

70-513-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/70-513-Csharp.html

NO.1 A Windows Communication Foundation (WCF) solution exposes the following service
over a TCP binding. (Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(ConcurrencyMode = ConcurrencyMode.Multiple)]
03 public class DataAccessService
04 {
05 [OperationContract]
06 public void PutMessage(string message)
07 {
08 MessageDatabase.PutMessage(message);
09 }
10 [OperationContract]
11 public string[] SearchMessages(string search)
12 {
13 return MessageDatabase.SearchMessages(search);
14 }
15 }
MessageDatabase supports a limited number of concurrent executions of its methods.
You need to change the service to allow up to the maximum number of executions of the
methods of MessageDatabase. This should be implemented without preventing customers
from connecting to the service. What should you do?
A. Change the service behavior as follows.
[ServiceBehavior(ConcurrencyMode = ConcurrencyMode.Multiple,
InstanceContextMode = InstanceContextMode.Single)]
B. Change the service behavior as follows.
[ServiceBehavior(ConcurrencyMode = ConcurrencyMode.Single, InstanceContextMode
= InstanceContextMode.PerSession)]
C. Add a throttling behavior to the service, and configure the maxConcurrentCalls.
D. Add a throttling behavior to the service, and configure the maxConcurrentSessions.
Answer: C

certification Microsoft   70-513-Csharp   70-513-Csharp   70-513-Csharp examen   70-513-Csharp examen   70-513-Csharp

NO.2 You are creating a Window s Communication Foundation (WCF) service application.
The application needs to service many clients and requests simultaneously. The
application also needs to ensure subsequent individual client requests provide a stateful
conversation. You need to configure the service to support these requirements. Which
attribute should you add to the class that is implementing the service?
A. [ ServiceBehavior ( InstanceContextMode = InstanceContextMode.PerSession ,
ConcurrencyMode = ConcurrencyMode.Single )]
B. [ ServiceBehavior ( InstanceContextMode = InstanceContextMode.PerCall ,
ConcurrencyMode = ConcurrencyMode.Reentrant )]
C. [ ServiceBehavior ( InstanceContextMode = InstanceContextMode.PerSession ,
ConcurrencyMode = ConcurrencyMode.Multiple )]
D. [ ServiceBehavior ( InstanceContextMode = InstanceContextMode.PerCall ,
ConcurrencyMode = ConcurrencyMode.Multiple )]
Answer: C

Microsoft   70-513-Csharp   70-513-Csharp

NO.3 A service implements the following contract. (Line numbers are included for reference
only.)
01 [ServiceContract(SessionMode = SessionMode.Required)]
02 public interface IContosoService
03 {
04 [OperationContract(IsOneWay = true, IsInitiating = true)]
05 void OperationOne(string value);
06
07 [OperationContract(IsOneWay = true, IsInitiating = false)]
08 void OperationTwo(string value);
09 }
The service is implemented as follows.
20 class ContosoService : IContosoService
21 { 22 public void OperationOne(string value) { }
23
24 public void OperationTwo(string value) { }
25 }
ContosoService uses NetMsmqBinding to listen for messages. The queue was set up to
use transactions for adding and removing messages. You need to ensure that
OperationOne and OperationTwo execute under the same transaction context when they
are invoked in the same session. What should you do?
A. Insert the following attribute to OperationOne on IContosoService.
[TransactionFlow(TransactionFlowOption.Mandatory)]
Insert the following attribute to OperationTwo on IContosoService.
[TransactionFlow(TransactionFlowOption.Mandatory)]
Insert the following attribute to OperationOne on ContosoService.
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete =
false)]
B. Insert the following attribute to OperationTwo on ContosoService.
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete =
true)]
C. Add the following XML segment to the application config file in the
system.serviceModel/bindings configuration section.
<netMsmqBinding>
<binding name="contosoTx" durable="true" receiveContextEnabled="true" />
</netMsmqBinding>
Then use the NetMsmqBinding named contosoTx to listen for messages from the clients.
D. Add the following XML segment to the application config file in the
system.serviceModel/bindings configuration section.
<customBinding>
<binding name="contosoTx">
<transactionFlow />
<binaryMessageEncoding />
<msmqTransport durable="true" />
</binding>
</customBinding>
Then use the CustomBinding named contosoTx to listen for messages from the clients.
Answer: B

Microsoft   70-513-Csharp   70-513-Csharp

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Microsoft 70-513-Csharp peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Microsoft 70-513-Csharp.

70-536-VB dernières questions d'examen certification Microsoft et réponses publiés

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Microsoft 70-536-VB. Ajoutez la Q&A au panier.

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Microsoft 70-536-VB pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Microsoft 70-536-VB, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 70-536-VB avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 70-536-VB plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 70-536-VB plus facilement avec la Q&A de Pass4Test.

Si vous êtes intéressé par l'outil formation Microsoft 70-536-VB étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Code d'Examen: 70-536-VB
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)
Questions et réponses: 173 Q&As

70-536-VB Démo gratuit à télécharger: http://www.pass4test.fr/70-536-VB.html

NO.1 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. Private Sub PerformCalculation()
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim newThread As New Thread( _
New ThreadStart(AddressOf PerformCalculation))
newThread.Start(myValues)
End Sub
B. Private Sub PerformCalculation()
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim delStart As New ThreadStart( _
AddressOf PerformCalculation)
Dim newThread As New Thread(delStart)
If newThread.IsAlive Then
newThread.Start(myValues)
End If
End Sub
C. Private Sub PerformCalculation ( _
ByVal values As CalculationValues)
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Application.DoEvents()
PerformCalculation(myValues)
Application.DoEvents()
End Sub
D. Private Sub PerformCalculation ( _
ByVal values As Object)
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim newThread As New Thread( _
New ParameterizedThreadStart( _
AddressOf PerformCalculation))
newThread.Start(myValues)
End Sub
Answer: D

Microsoft examen   70-536-VB examen   70-536-VB examen

NO.2 You develop a service application named PollingService that periodically calls long-running
procedures. These procedures are called from the DoWork method.
You use the following service application code:
When you attempt to start the service, you receive the following error message: Could not start the
PollingService service on the local computer. Error 1053: The service did not respond to the start or
control request in a timely fashion.
You need to modify the service application code so that the service starts properly.
What should you do?
A. Move the loop code into the constructor of the service class from the OnStart method.
B. Drag a timer component onto the design surface of the service. Move the calls to the long-running
procedure from the OnStart method into the Tick event procedure of the timer, set the Enabled property of
the timer to True, and call the Start method of the timer in the OnStart method.
C. Add a class-level System.Timers.Timer variable to the service class code. Move the call to the DoWork
method into the Elapsed event procedure of the timer, set the Enabled property of the timer to True, and
call the Start method of the timer in the OnStart method.
D. Move the loop code from the OnStart method into the DoWork method.
Answer: C

certification Microsoft   certification 70-536-VB   70-536-VB examen   70-536-VB

NO.3 You are creating a class to compare a specially-formatted string. The default collation comparisons do
not apply.
You need to implement the IComparable(Of String) interface.
Which code segment should you use?
A. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As String) As _
Integer Implements IComparable(Of String).CompareTo
...
End Function
End Class
B. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As Object) As _
Integer Implements IComparable(Of String).CompareTo
...
End Function
End Class
C. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As String) _
As Boolean Implements IComparable(Of String).CompareTo
...
End Function
End Class
D. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As Object) _
As Boolean Implements IComparable(Of String).CompareTo
...
End Function
End Class
Answer: A

certification Microsoft   certification 70-536-VB   70-536-VB   certification 70-536-VB   70-536-VB

NO.4 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
Which storage option should you choose?
A. Dim answers As New BitVector32(1)
B. Dim answers As New BitVector32(-1)
C. Dim answers As New BitArray(1)
D. Dim answers As New BitArray(-1)
Answer: B

Microsoft   70-536-VB   70-536-VB   70-536-VB   70-536-VB

NO.5 You are creating an application that lists processes on remote computers. The application requires a
method that performs the following tasks:
Accept the remote computer name as a string parameter named strComputer.
Return an ArrayList object that contains the names of all processes that are running on that computer.
You need to write a code segment that retrieves the name of each process that is running on the remote
computer and adds the name to the ArrayList object.
Which code segment should you use?
A. Dim al As New ArrayList()
Dim procs As Process() = _
Process.GetProcessesByName(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc)
Next
B. Dim al As New ArrayList()
Dim procs As Process() = Process.GetProcesses(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc)
Next
C. Dim al As New ArrayList()
Dim procs As Process() = _
Process.GetProcessesByName(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc.ProcessName)
Next
D. Dim al As New ArrayList()
Dim procs As Process() = Process.GetProcesses(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc.ProcessName)
Next
Answer: D

Microsoft   70-536-VB   70-536-VB   70-536-VB examen   certification 70-536-VB

NO.6 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName
D. Insert the following line of code between lines 04 and 05:
crtl.Continue()
E. Insert the following line of code between lines 04 and 05:
crtl.Start()
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0)
Answer: BE

Microsoft examen   70-536-VB   certification 70-536-VB   70-536-VB examen   70-536-VB

NO.7 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. Dim al As ArrayList = New ArrayList()
SyncLock al.SyncRoot
Return al
End SyncLock
B. Dim al As ArrayList = New ArrayList()
SyncLock al.SyncRoot.GetType()
Return al
End SyncLock
C. Dim al As ArrayList = New ArrayList()
Monitor.Enter(al)
Monitor.Exit(al)
Return al
D. Dim al As ArrayList = New ArrayList()
Dim sync_al as ArrayList = ArrayList.Synchronized(al)
Return sync_al
Answer: D

certification Microsoft   70-536-VB   70-536-VB   70-536-VB

NO.8 You need to create a method to clear a Queue named q.
Which code segment should you use?
A. Dim e As Object
For Each e In q
q.Dequeue()
Next
B. Dim e As Object
For Each e In q
q.Enqueue(Nothing)
Next
C. q.Clear()
D. q.Dequeue()
Answer: C

Microsoft   70-536-VB   certification 70-536-VB   certification 70-536-VB

NO.9 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. Dim mySetup As AppDomainSetup = _
AppDomain.CurrentDomain.SetupInformation
mySetup.ShadowCopyFiles = "true"
B. Dim myProcess As System.Diagnostics.Process
myProcess = New System.Diagnostics.Process()
C. Dim domain As AppDomain
domain = AppDomain.CreateDomain("MyDomain")
D. Dim myComponent As System.ComponentModel.Component
myComponent = New System.ComponentModel.Component()
Answer: C

certification Microsoft   certification 70-536-VB   70-536-VB examen   certification 70-536-VB   certification 70-536-VB

NO.10 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C

Microsoft   certification 70-536-VB   70-536-VB examen

NO.11 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "name"
<ConfigurationProperty("role")> _
Public ReadOnly Property Name() As String
Get
Return CType(Me("role"), String)
End Get
End Property
End Class
B. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "role"
<ConfigurationProperty("name", IsRequired:=True)> _
Public ReadOnly Property Name() As String
Get
Return CType(Me("name"), String)
End Get
End Property
End Class
C. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "role"
Private _name As String
<ConfigurationProperty("name")> _
Public ReadOnly Property Name() As String
Get
Return _name
End Get
End Property
End Class
D. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "name"
Private _name As String
<ConfigurationProperty("role", IsRequired:=True)> _
Public ReadOnly Property Name() As String
Get
Return _name
End Get
End Property
End Class
Answer: B

Microsoft   70-536-VB   70-536-VB   70-536-VB   70-536-VB examen

NO.12 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. Class MyDictionary
Implements Dictionary(Of String, String)
B. Class MyDictionary
Inherits HashTable
C. Class MyDictionary
Implements IDictionary
D. Class MyDictionary
...
End Class
Dim t As New Dictionary(Of String, String)
Dim dict As MyDictionary = CType(t, MyDictionary)
Answer: A

certification Microsoft   70-536-VB examen   70-536-VB   70-536-VB

NO.13 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. Public Class Age
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Object
If TypeOf obj Is Age Then
Dim _age As Age = CType(obj, Age)
Return Value.CompareTo(obj)
End If
Throw New ArgumentException("object not an Age")
End Function
End Class
B. Public Class Age
Public Value As Integer
Public Function CompareTo(ByVal iValue As Integer) As Object
Try
Return Value.CompareTo(iValue)
Catch
Throw New ArgumentException ("object not an Age")
End Try
End Function
End Class
C. Public Class Age
Implements IComparable
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Integer _
Implements IComparable.CompareTo
If TypeOf obj Is Age Then
Dim _age As Age = CType(obj, Age)
Return Value.CompareTo(_age.Value)
End If
Throw New ArgumentException("object not an Age")
End Function
End Class
D. Public Class Age
Implements IComparable
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Integer _
Implements IComparable.CompareTo
Try
Return Value.CompareTo((CType(obj, Age)).Value)
Catch
Return -1
End Try
End Function
End Class
Answer: C

Microsoft   70-536-VB examen   70-536-VB   70-536-VB examen

NO.14 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. Public Class deptElement
Inherits ConfigurationElement
Protected Overrides Sub DeserializeElement( _
ByVal reader As XmlReader, _
ByVal serializeCollectionKey As Boolean)
Dim dept As Department = New Department()
dept.name = ConfigurationManager.AppSettings("name")
dept.manager = _
ConfigurationManager.AppSettings("manager")
End Sub
End Class
B. Public Class deptElement
Inherits ConfigurationElement
Protected Overrides Sub DeserializeElement( _
ByVal reader As XmlReader, _
ByVal serializeCollectionKey As Boolean)
Dim dept As Department = New Department()
dept.name = reader.GetAttribute("name")
dept.manager = reader.GetAttribute("manager")
End Sub
End Class
C. Public Class deptHandler
Implements IConfigurationSectionHandler
Public Function Create(ByVal parent As Object, _
ByVal configContext As Object, _
ByVal section As System.Xml.XmlNode) As Object _
Implements IConfigurationSectionHandler.Create
Dim dept As Department = new Department()
dept.name = section.SelectSingleNode("name").InnerText
dept.manager = _
section.SelectSingleNode("manager").InnerText
Return dept
End Function
End Class
D. Public Class deptHandler
Implements IConfigurationSectionHandler
Public Function Create(ByVal parent As Object, _
ByVal configContext As Object, _
ByVal section As System.Xml.XmlNode) As Object _
Implements IConfigurationSectionHandler.Create
Dim dept As Department = new Department()
dept.name = section.Attributes("name").Value
dept.manager = section.Attributes("manager").Value
Return dept
End Function
End Class
Answer: C

Microsoft   70-536-VB   certification 70-536-VB   70-536-VB examen

NO.15 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. Public Delegate Function PowerDeviceOn( _
ByVal result As Boolean, _
ByVal autoPowerOff As?DateTime) _
As Integer
B. Public Delegate Function PowerDeviceOn( _
ByVal sender As Object, _
ByVal autoPowerOff As EventArgs) _
As Boolean
C. Public Delegate Sub PowerDeviceOn( _
ByVal autoPowerOff As DateTime)
D. Public Delegate Function PowerDeviceOn( _
ByVal autoPowerOff As DateTime) _
As Boolean
Answer: C

Microsoft   70-536-VB examen   70-536-VB examen   70-536-VB

NO.16 You write the following code.
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. Public Shared Event Fax As FaxDocs
B. Public Shared Event FaxDocs As FaxArgs
C. Public Class FaxArgs
Inherits EventArgs
Private coverPageInfo As String
Public Sub New(ByVal coverInfo As String)
Me.coverPageInfo = coverInfo
End Sub
Public ReadOnly Property CoverPageInformation As String
Get
Return Me.coverPageInfo
End Get
End Property
End Class
D. Public Class FaxArgs
Inherits EventArgs
Private coverPageInfo As String
Public ReadOnly Property CoverPageInformation As String
Get
Return Me.coverPageInfo
End Get
End Property
End Class
Answer: A

Microsoft examen   certification 70-536-VB   70-536-VB examen   70-536-VB examen

NO.17 You are creating an undo buffer that stores data modifications.
You need to ensure that the undo functionality undoes the most recent data modifications first. You also
need to ensure that the undo buffer permits the storage of strings only.
Which code segment should you use?
A. Dim undoBuffer As New Stack(Of String)
B. Dim undoBuffer As New Stack()
C. Dim undoBuffer As New Queue(Of String)
D. Dim undoBuffer As New Queue()
Answer: A

Microsoft examen   70-536-VB examen   70-536-VB

NO.18 You are developing a custom event handler to automatically print all open documents. The event
handler helps specify the number of copies to be printed.
You need to develop a custom event arguments class to pass as a parameter to the event handler.
Which code segment should you use?
A. Public Class PrintingArgs
Private _copies As Integer
Public Sub New(ByVal numberOfCopies As Integer)
Me._copies = numberOfCopies
End Sub
Public ReadOnly Property Copies() As Integer
Get
Return Me._copies
End Get
End Property
End Class
B. Public Class PrintingArgs
Inherits EventArgs
Private _copies As Integer
Public Sub New(ByVal numberOfCopies As Integer)
Me._copies = numberOfCopies
End Sub
Public ReadOnly Property Copies() As Integer
Get
Return Me._copies
End Get
End Property
End Class
C. Public Class PrintingArgs
Private eventArgs As EventArgs
Public Sub New(ByVal args As EventArgs)
Me.eventArgs = args
End Sub
Public ReadOnly Property Args() As EventArgs
Get
Return eventArgs
End Get
End Property
End Class
D. Public Class PrintingArgs
Inherits EventArgs
Private copies As Integer
End Class
Answer: B

Microsoft examen   70-536-VB   70-536-VB examen   70-536-VB examen   70-536-VB examen   70-536-VB

NO.19 You are testing a newly developed method named PersistToDB. This method accepts a parameter of
type EventLogEntry. This method does not return a value.
You need to create a code segment that helps you to test the method. The code segment must read
entries from the application log of local computers and then pass the entries on to the PersistToDB
method. The code block must pass only events of type Error or Warning from the source MySource to the
PersistToDB method.
Which code segment should you use?
A. Dim myLog As New EventLog("Application", ".")
For Each entry As EventLogEntry In myLog.Entries
If entry.Source = "MySource" Then
PersistToDB(entry)
End If
Next
B. Dim myLog as New EventLog("Application", ".")
myLog.Source = "MySource"
For Each entry As EventLogEntry In myLog.Entries
If entry.EntryType = (EventLogEntryType.Error And _
EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
Next
C. Dim myLog as New EventLog("Application", ".")
For Each entry As EventLogEntry In myLog.Entries
If entry.Source = "MySource" Then
If (entry.EntryType = EventLogEntryType.Error) Or _
(entry.EntryType = EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
End If
Next
D. Dim myLog as New EventLog("Application", ".")
myLog.Source = "MySource"
For Each entry As EventLogEntry In myLog.Entries
If (entry.EntryType = EventLogEntryType.Error) Or _
(entry.EntryType = EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
Next
Answer: C

Microsoft   certification 70-536-VB   70-536-VB examen   70-536-VB

NO.20 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.BaseDirectory, "Assembly1.dll")
Dim asm As [Assembly] = [Assembly].LoadFrom(myPath)
B. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.BaseDirectory, "Assembly1.dll")
Dim asm As [Assembly] = [Assembly].Load(myPath)
C. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.DynamicDirectory, "Assembly1.dll")
Dim asm As [Assembly] = _
AppDomain.CurrentDomain.Load(myPath)
D. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim asm As [Assembly] = domain.GetData("Assembly1.dll")
Answer: A

Microsoft   70-536-VB   certification 70-536-VB

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Microsoft 70-536-VB à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.