Certification Nortel de téléchargement gratuit pratique d'examen 922-111, questions et réponses

Pass4Test est un catalyseur de votre succès de test Nortel 922-111. En visant la Certification de Nortel, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Nortel 922-111, la Q&A Nortel 922-111 est un bon choix pour vous.

Obtenez la Q&A de test Nortel 922-111 de Pass4Test plus tôt, vous pouvez réussir le test Certification Nortel 922-111 plus tôt.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Pass4Test vous promet de vous aider à passer le test Nortel 922-111, vous pouvez télécharger maintenant les Q&As partielles de test Nortel 922-111 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Nortel 922-111. Les documentations particulièrement visée au test Nortel 922-111 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Nortel 922-111.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Nortel 922-111 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Pass4Test peut offrir nombreux de documentations aux candidats de test Nortel 922-111, et aider les candidats à réussir le test. Les marétiaux visés au test Nortel 922-111 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Nortel 922-111 100%.

Code d'Examen: 922-111
Nom d'Examen: Nortel (Communication Server 1000 to Rls.6.0 Upgrades for Technicia)
Questions et réponses: 27 Q&As

922-111 Démo gratuit à télécharger: http://www.pass4test.fr/922-111.html

NO.1 A customer is upgrading an existing Option 11C Rls. 5.5 chassis system to a Communication Server
1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Server and Signaling Server card is being
installed during the upgrade. The CPPM Co-Resident Call Server and Signaling Server card has been
installed into Slot 1 and configured. What is the next sequential step in the upgrade process?
A.Insert the bootable RMD containing software installation files into the faceplate of the CPPM Call Server
card.
B.Reboot the card to begin the Linux base software installation.
C.Insert the RMD containing the Rls. 5.5 customer database into the faceplate of the CPPM Co-Resident
Call card.
D.Connect the administration console to Port 0 of the NTAK19EC SDI cable.
Answer:D

Nortel examen   922-111   certification 922-111   922-111 examen   922-111 examen

NO.2 A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to a
Communication Server 1000E Rls. 6.0 Standard Availability. A CPPM card will be installed as a
Co-Resident Call Server and Signaling Server during the upgrade. Which task must be completed prior to
loading Linux Base onto the card? (Choose two.)
A.The BIOS of the card must be updated to version 18.
B.The S5 switch must be set to position 1.
C.The CMOS settings must be reset to factory defaults.
D.The on-board 1 GB Compact Flash must be installed.
Answer:A C

Nortel   922-111 examen   certification 922-111

NO.3 A customer with a Communication Server (CS) 1000E Rls. 5.5 HA system with two IPMGs and dual
CPPM Signaling Servers is upgrading their system to release 6.0. The system is part of an IP Peer
Network that includes a NRS database. Which upgrade step is correct?
A.Use NRS Manager to download the NRS backup file to a compact flash.
B.Use Element Manager to download the Signaling Server backup file to a compact.
C.User NRS Manager to download the NRS backup file to the local PC.
D.Use Element Manager to download the Signaling Server backup file to the local PC.
Answer:C

Nortel examen   922-111   922-111

NO.4 A customer with an existing Option 11C Rls. 5.5 chassis system is planning to upgrade to a
Communication Server 1000E Rls. 6.0 Standard Availability. A CPPM Co-Resident Call Server and
Signaling Server card will be installed. The system will automatically map small system Terminal Numbers
to large system Terminal format during the upgrade. In this upgrade scenario, which actions must be
completed manually? (Choose two.)
A.Re-programming Digital Trunk Terminal Numbers with a new format.
B.Programming the DSP daughterboards on the IP Media Gateway.
C.Entering the IP address for each IP Media Gateway in LD 97.
D.Re-programming Tone Receiver Terminal Numbers with a new format.
Answer:B C

certification Nortel   922-111   922-111   922-111 examen   922-111

NO.5 Click on the Exhibit button. You are upgrading a single site Option 11C Rls. 5.5 system to a
Communication Server 1000E Rls. 6.0 Standard Availability with a single IP Media Gateway (MG) 1000E
chassis. The customer is using a CPPM card from inventory as a CPPM Co-Resident Call Server and
Signaling Server. Based on the output received when the card boots up, shown in the exhibit, what must
done before Linux Base can be loaded?
A.the Low Memory must be doubled
B.the BIOS must be updated from version 74 to version 18
C.the BIOS must be updated from version 14 to version 18
D.the Extended Memory must be doubled
Answer:C

Nortel   certification 922-111   certification 922-111

Le test Nortel 922-111 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Nortel 922-111 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Nortel 920-320, de formation et d'essai

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Choisissez le Pass4Test, choisissez le succès de test Nortel 920-320. Bonne chance à vous.

Est-ce que vous vous souciez encore pour passer le test Nortel 920-320? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Nortel 920-320, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Nortel 920-320. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Nortel 920-320 dans Pass4Test pour se former avant le test Nortel 920-320.

Code d'Examen: 920-320
Nom d'Examen: Nortel (Meridian 1 Database)
Questions et réponses: 53 Q&As

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Nortel 920-320. Il n'y a pas de soucis à réussir le test avec une haute note.

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Nortel 920-320 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Nortel 920-320. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

920-320 Démo gratuit à télécharger: http://www.pass4test.fr/920-320.html

NO.1 To ensure that customers are informed about Ethernet LAN ports, what information
should you provide the customer about Meridian1 system ELANs?
A. The Nortel Networks ELAN is used for system administration and must be directly connected
to a Customers LAN (CLAN).
B. The Nortel Networks ELAN is the Enhanced Local Area Network sued to perform system
backups across the network to a customer provided server.
C. The Nortel Networks ELAN is used for connection to other Nortel Networks applications and
must be protected from traffic on a Customers LAN (CLAN).
D. The Nortel Networks ELAN is always a closed private LAN, using a simple hub for
connecting the Meridian 1 system to Optivity Telephony Manager (OTM), CallPilot, or
Symposium.
Answer: C

Nortel examen   920-320   certification 920-320   920-320

NO.2 Which procedure should you use to effectively implement Ethernet interface (ELAN) on a
Meridian1 system?
A. Use LD 17, Create host entries, Assign host to primary and/or Primary IP address(es), Set up
Ethernet subnet mask, Set up routing entry.
B. Use LD 117, Create host entries, Assign host to primary and / or secondary IP address(es), Set
up Ethernet subnet mask, Set up routing entry.
C. Enable the ELAN interface in LD 117, Use ipconfig to ensure that the IP address(es), subnet
mask and gateway have been auto-configured by the DHCP server.
D. Enable the ELAN interface in LD 17, Use ipconfig to ensure that the secondary IP address(es)
subnet mask and gateway have been auto-configured by the Dynamic Host, Configuration
Protocol (DHCP) server.
Answer: B

Nortel   920-320 examen   920-320 examen   920-320

NO.3 A telephone needs to be restricted from access to the Paging (PAG) route. If the PAG route
Trunk Access Restriction Group (TARG) equals 1, 3, 5, 6, 7, What should be the Trunk
Group Access Restriction (TGAR) of that telephone?
A. 0
B. 2
C. 4
D. 6
Answer: D

certification Nortel   920-320   920-320   920-320

NO.4 Certkiller .com has reported that some local calls are NOT going through (the caller hears
no ringing, etc.). Which two tools can the technician use to determine which trunk is
responsible? (Choose two.)
A. Use LD 80, to trace the DN of the telephone with the problem call. While the problem is
occurring, the output will identify the TN of the trunk for further testing.
B. Use LD 36, to list threshold overflows for the local route. Look for trunks with excessive
short holds and conduct further testing on those trunks using the TRK command in Load 36.
C. Use LD 80, to initiate a Malicious Call Trace (MCT) on the DN reporting the problem for the
date and time indicated in the problem report. This will identify the TN of the trunk involved.
D. Use LD 40, Call Detail Recording Diagnostic, to trace call history for the DN of the user
reporting the problem. From the CDR records output, correlate the call record time with the time
of the users problem call. The matching CDR record will identify the TN of the trunk that should
be tested.
Answer: A B

certification Nortel   certification 920-320   920-320 examen

NO.5 Certkiller .com's disaster recovery plan calls for off-site backup of its Meridian1 system
database, in case a disaster destroys the on-site copies of the system's configuration. How
would you fulfill this request for a Meridian1 Option 61C or 81C?
A. Optivity Telephony Manager (OTM) is the only way to crate an off-site backup for the
Meridian 1 Option 61C or 81C.
B. An auxiliary Floppy Disk Drive (Fdd) would need to be equipped on the Meridian 1 Option
61C or 81C to create the off-site backup.
C. Ensure that they have an extra blank PC Card (PCMCIA) blank memory card and that they
are properly trained to perform an Equipment Data Dump (EDD) on the blank card for off-site
storage.
D. Ensure that they have 2 MB (1.544 MB formatted capacity) blank floppy disks and that they
are properly trained to perform an EDD on the blank floppy disk for off-site storage.
Answer: D

certification Nortel   920-320   920-320

NO.6 The Human Resources department wants to have the HR help line?appear on everyone's
telephone (8 users) in the department. They want any available employee to answer "HR
help line" calls. In addition, they want to be able to receive as many simultaneous calls as
there are employees (8) in the department. What would you recommend to the customer?
A. An Automatic Call Distributor (ACD) queue must be setup in Load 32. The 8 employees are
then defined as agents of that ACD group.
B. A Uniform Call Distribution (UCD) list can be defined with the DN's of the 8 employees in
the Human Resources department.
C. A multiple Appearance, Single Call Arrangement DN (SCR or SCN) can be programmed as a
secondary DN on the 8 users digital or Internet Telephones. It allows as many calls to be in
progress as there are appearances of the DN.
D. A Multiple Appearance, Multiple Call Arrangement DN (MCR or MCN) can be programmed
as a secondary DN on the 8 users digital or Internet Telephones. It allows as many calls to be in
progress as there are appearances of the DN.
Answer: D

certification Nortel   920-320 examen   920-320   920-320 examen   920-320 examen   certification 920-320

NO.7 The Customer Data Block (LD 15) is used define customer related timers when customizing
a Meridian1 system to customer requirements. Which timer is NOT defined in the
Customer Data Block (LD 15)?
A. switchhook flash timing
B. dial tone and Interdigit timeout
C. busy tone / overflow tone timeout
D. off hook alarm security timeout timer
Answer: D

certification Nortel   certification 920-320   920-320 examen

NO.8 Certkiller .com wants to be reassured that their customer data is safe on their Option 11C,
or Option 11C mini. How is the customer database backed up on these systems?
A. Optivity Telephony Manager (OTM) is required to backup the Meridian 1 Option 11C or 11C
mini to Meridian 1 Option 11C Hard Disk Drive (HDD).
B. The system backup procedure automatically backs up the customer configuration over the
Ethernet link to a customer provided server at midnight (daily).
C. The Equipment Data Dump (EDD) backs up the latest configuration database, including
recent service changes, by copying from the system's main memory (RAM) to the primary flash
ROM, Backup Flash ROM, and PCMCIA card (if one is present).
D. The EDD procedure backs up the latest configuration database, including recent service
changes, by copying from the system's main memory (RAM) to the Hard Disk Drive, and the
Floppy Disk Drive (FDD), if equipped.
Answer: C

Nortel   certification 920-320   certification 920-320   920-320 examen   920-320

NO.9 Certkiller .com wants external calls at a particular station to forward to an administrative
assistant under busy or no answer conditions, but wants internal calls under busy or no
answer conditions to forward to voicemail. Which software feature should you use to meet
this request?
A. The Meridian Integrated Personal Call Director (MIPCD) application would be required to
route based on Caller ID
B. The feature Call Forward by Call Type (CFCT) routes calls receiving a no answer or busy to
separately defined dialing numbers (DNs) based on if the call is internal and external
C. The feature Call Forward by Call Type (CFCT) only routes calls receiving a no answer to
separately defined dialing numbers (DNs) based on if the call is internal and external, busy calls
always follow the hunt DN.
D. Call Forward by Call Type (CFCT) only routes call receiving a busy to separately defined
dialing numbers (DNs) based on if the call is internal and external, no answer calls always
follow the forward no answer (FNA) DN
Answer: B

Nortel   certification 920-320   920-320   920-320

NO.10 On A Non Direct Inward Dial (DID) incoming trunk, which overlay (LD) should you use to
route calls to an Automatic Call Distribution (ACD) DN 6000?
A. LD 16 AUTO (Auto Terminate) YES ATDN (Auto terminate DN) to 6000
B. LD 16 AUTO (Auto Terminate) YES and LD 14 ATDN (Auto Terminate DN) to 6000
C. LD 16 AUTO (Auto Terminate) YES and 15 ATDN (Auto Terminate DN) to 6000
D. LD 16 IDC (Incoming Digit Conversion) 27 and LD 49 IDTG (Incoming Digit Termination
Group) to 6000
Answer: B

Nortel   920-320   920-320   920-320 examen

Le test Nortel 920-320 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Dernières Nortel 920-340 examen pratique questions et réponses

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Nortel 920-340. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Nortel 920-340 sans aucune doute.

Le test Certificat Nortel 920-340 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Nortel 920-340. Vous allez prendre toutes essences du test Nortel 920-340 dans une courte terme.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Nortel 920-340, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Nortel 920-340. Peut-être d'obtenir le Certificat Nortel 920-340 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Code d'Examen: 920-340
Nom d'Examen: Nortel (Nortel Software Communication System 500 Rls.2.0 Config)
Questions et réponses: 57 Q&As

Finalement, la Q&A Nortel 920-340 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Nortel 920-340 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Nortel, vous aurez un meilleur salaire et une plus grande space à se développer.

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Nortel 920-340, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

La Q&A Nortel 920-340 de Pass4Test est liée bien avec le test réel de Nortel 920-340. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Nortel 920-340 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

920-340 Démo gratuit à télécharger: http://www.pass4test.fr/920-340.html

NO.1 Which gateway provides connectivity to the PSTN via digital interfaces (PRI/T1/E1 or BRI)?
A.AudioCodes MP-118 FXO
B.Nortel Analog VoIP gateway 4 port FXO
C.AudioCodes MP-114 FXS
D.AudioCodes Mediant 1000
Answer:D

Nortel   920-340 examen   920-340   certification 920-340

NO.2 On which server does the Nortel Software Communication System 500 (SCS500) run?
A.Intel dual-core E4600 CPU
B.Standard 1 GB/s Ethernet server
C.System 5 default server platform
D.Dell Optiplex 755 server platform
Answer:D

Nortel   920-340 examen   920-340   certification 920-340

NO.3 Which action is required to configure Hunt Group call scenarios for incoming received digits presented
to the Software Communication System 500 (SCS500) system?
A.Configure user aliases.
B.Enter the digits from the provider of the digital trunk as the hunt group number.
C.Determine the call sequence for Hunt Group user extensions.
D.Specify a Hunt Group Fallback Destination.
Answer:B

certification Nortel   920-340   920-340   920-340   920-340   920-340 examen

NO.4 Click the Exhibit button. Which field do you change to adjust the number of dialpad keys the system
accepts before interpreting a user's request?
A.Inter-Dual Tone Multi-frequency (DTMF) Timeout
B.Maximum Number of DTMF tones
C.Replay Count
D.Overall DTMF Timeout
Answer:B

certification Nortel   certification 920-340   920-340   certification 920-340   920-340 examen   920-340

NO.5 In comparing the types of conferences available with the Software Communication System 500
(SCS500), which conference uses reserved ports?
A.Scheduled conference
B.Administrator conference
C.Meet Me conference
D.Instant conference
Answer:A

Nortel   920-340   920-340   920-340 examen

Vous allez choisir Pass4Test après essayer une partie de Q&A Nortel 920-340 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Nortel 920-340.

Le dernier examen Nortel 922-109 gratuit Télécharger

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Nortel 922-109. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Nortel 922-109.

Si vous faites toujours la lutte contre le test Nortel 922-109, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Nortel 922-109. Si vous avez déjà décidé à s'améliorer via Nortel 922-109, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Pass4Test est un seul site de provider le guide d'étude Nortel 922-109 de qualité. Peut-être que vous voyiez aussi les Q&A Nortel 922-109 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Peut-être vous voyez les guides d'études similaires pour le test Nortel 922-109, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Nortel 922-109 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Vous n'avez besoin que de faire les exercices à propos du test Nortel 922-109 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Code d'Examen: 922-109
Nom d'Examen: Nortel (Communications Server 1000 Rls.6.0 BARS/NARS)
Questions et réponses: 34 Q&As

922-109 Démo gratuit à télécharger: http://www.pass4test.fr/922-109.html

NO.1 Click on the Exhibit button. Given the SDRR programming options shown in the exhibit, which SDRR
programming would allow a user at to be able to dial 1-900-867-3333, but not successfully dial any other
1-900 based number?
A.Table 1
B.Table 2
C.Table 3
D.Table 4
Answer:A

certification Nortel   certification 922-109   922-109   922-109 examen

NO.2 Click on the Exhibit buttons. Given the customer's programmed database shown in the exhibits and
where AC1 = 9, which RLI will the call complete when a station user dials 9-814-666-3434?
A.RLI 2
B.RLI 3
C.RLI 4
D.RLI 9
E.call will not complete as dialed
Answer:E

Nortel   922-109 examen   certification 922-109   922-109 examen

NO.3 Click on the Exhibit button. A customer's dialing requirements, listed below, require that all station users
assigned an NCOS of 3 and Class of Service of Conditionally Toll Denied (CTD) be able to place toll calls
from the United States to Australia. Australia Country Code: 61 NCOS of 3 has an FRL of 3 Expensive
Routers are not being used With reference to the exhibit, which table will allow all station users to be able
to place these toll calls?
A.Provisioning Table A
B.Provisioning Table B
C.Provisioning Table C
D.Provisioning Table D
Answer:B

Nortel   922-109   922-109   922-109

NO.4 544-3333 not complete?
A.AC1 Access Code was not dialed
B.NXX 544 is not provisioned in the customer's database
C.3333 is Denied under the SDRR programming
D.AC2 Access Code was not dialed
Answer:B

certification Nortel   certification 922-109   922-109   922-109   certification 922-109   922-109

NO.5 With Communication Server 1000 Rls. 6.0, Zone Based Dialing is supported for both public and private
dial and numbering plans for on-net calls. Which statements best describe Zone Based Dialing? (Choose
two.)
A.For outgoing trunk calls, CLID is converted to E.164 format when DIALPLAN is configured as PUB, for
PRV type - CLID remains as is.
B.On-net Calls are routed using each CS 1000 site dial plan database and are routed to the remote
system to process.
C.Private and Public (E.164) dial plans and features are not retained. Zone Based Dialing uses the
Flexible Dial Plan information to route network-wide.
D.A new Zone type, Numbering Zones, provides a user interface to configure the parameters for:
Zone-based Parameters, Flexible Dial Plan, and Direct Inward Dial number.
Answer:A D

certification Nortel   922-109   922-109

NO.6 Click on the Exhibit button. Consider a customer's dialing plan and programming shown in the exhibit.
Assuming all required Route List Indexes have been programmed, why will the station user's dialed call of

922-109 est un test de Nortel Certification, donc réussir 922-109 est le premier pas à mettre le pied sur la Certifiction Nortel. Ça peut expliquer certiainement pourquoi le test Nortel 922-109 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 922-109. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

Pass4Test offre de Network Appliance NS0-130 matériaux d'essai

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Network Appliance NS0-130 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Network Appliance NS0-130 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Network Appliance NS0-130 est le rêve pour les professionnels ambitieux.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Network Appliance NS0-130. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Network Appliance NS0-130. Choisir le produit de Pass4Test particulier pour le test Certification Network Appliance NS0-130 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Network Appliance NS0-130, la voie à la réussite de votre professionnel sera ouverte pour vous.

Code d'Examen: NS0-130
Nom d'Examen: Network Appliance (Storage Professional Data Protection Practice Test)
Questions et réponses: 48 Q&As

Pass4Test vous promet de vous aider à passer le test Network Appliance NS0-130, vous pouvez télécharger maintenant les Q&As partielles de test Network Appliance NS0-130 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Le test Certification Network Appliance NS0-130 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Network Appliance NS0-130. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Network Appliance NS0-130.

NS0-130 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-130.html

NO.1 True or False: For a single parent, where all requests to it come from its children, its shit rate will
be higher than its children.
A. True
B. False
Answer: B

certification Network Appliance   NS0-130   NS0-130 examen   NS0-130

NO.2 .How does the parameter "Check for new articles" save bandwidth?
A. NetCache will query the news server for new articles for all newsgroups individually once per
interval
B. NetCache will query the news serve for new articles for all groups at the same time once
per interval
C. NetCache will not query the server for articles until a request for that newsgroup is made
to the cache after the time period has ended
D. NetCaache will not query the server for new articles until a request for the newsgroup is
made to the cache before the time period has ended
Answer: C

Network Appliance examen   NS0-130   NS0-130

NO.3 .When NetCache version 5.1 receive a response to a DNS query, what determines how long
that entry will be stored by NetCache?
A. config.system.jdns.ttl
B. the DNS server tellsNetCache
C. it will always be stored for 60 seconds
D. netCahce never stores DNS responses
Answer: B

certification Network Appliance   NS0-130   NS0-130 examen   NS0-130

NO.4 .Fill in the blank for the following statement:
SnapMiror qtree replication can be set up for a maximum of ________ qtrees on any one volume.
A. 31
B. 63
C. 127
D. 255
Answer: D

Network Appliance   NS0-130   NS0-130

NO.5 .Fill in the Blank.
Using the letter in front of each, put the following ACLs in order form least CPU intensive to most
CPU intensive:
A. denyseve-IP 193.2.92.11
B. denyurl matches ".193\.2\.92\11.*S"
C. denyurl-prefix http://193.2.92.11/tmp/
D. your answer
Answer: A,B,C

certification Network Appliance   NS0-130   NS0-130   NS0-130   certification NS0-130

Est-que vous s'inquiétez encore à passer le test Certification NS0-130 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Network Appliance NS0-130? Si vous voulez réussir le test Network Appliance NS0-130 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Le plus récent matériel de formation Network Appliance NS0-120

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Network Appliance NS0-120, et aussi une meilleure assurance du succès du test NS0-120. Vous choisissez Pass4Test, vous choisissez le succès.

Le test Network Appliance NS0-120 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Network Appliance NS0-120 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Code d'Examen: NS0-120
Nom d'Examen: Network Appliance (Data ONTAP Advanced Exam)
Questions et réponses: 77 Q&As

Le Certificat Network Appliance NS0-120 est un passport rêvé par beaucoup de professionnels IT. Le test Network Appliance NS0-120 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Network Appliance NS0-120. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Network Appliance NS0-120 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Network Appliance NS0-120 pour prendre un essai.

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Network Appliance NS0-120. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Network Appliance NS0-120.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Network Appliance NS0-120 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Network Appliance NS0-120. Cet outil de formation est convenable pour les candidats de test Network Appliance NS0-120. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

NS0-120 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-120.html

NO.1 Which TWO of the following are Data ONTAP commands for gathering performance information?
A.sio_ntap_soll
B.sysstat
C.perfstat
D.nfsstat
Answer:B D

Network Appliance examen   NS0-120   NS0-120

NO.2 If a qtree security style is UNIX, CIFS client file access is determined by ___________ .
A.NT ACLs
B.UNIX permissions, and if the CIFS user name can be mapped to a UNIX user name
C.The last client to set permissions
D.(Not Allowed) A CIFS client cannot access files in a qtree with a security style of UNIX.
Answer:B

Network Appliance   NS0-120   certification NS0-120   NS0-120

NO.3 Which of the following statements would NOT apply to an entry in the /etc/exports file regarding
exporting directories, qtrees, and volumes?
A.Export each volume separately.
B.The storage appliance must resolve host names.
C.Export ancestors and their descendants.
D.Export /vol.
Answer:D

certification Network Appliance   NS0-120   certification NS0-120

NO.4 To determine if a problem you are experiencing is known to NetApp, use the NOW site _____ utility.
A.System Configuration Guide
B.Bugs Online
C.Release Comparison
D.Ethereal
Answer:B

Network Appliance   NS0-120   NS0-120   NS0-120   NS0-120 examen

NO.5 Which one of the following commands best displays the statistics for the network interface?
A.netstat
B.ifconfig
C.sysstat
D.ifstat
Answer:D

Network Appliance   NS0-120   certification NS0-120   certification NS0-120   NS0-120 examen

NO.6 Which option should be used with the nfsstat command to assist in decoding export and mountd errors?
A.nfsstat -d
B.nfsstat -z
C.nfsstat -c
D.nfsstat -t
Answer:A

certification Network Appliance   NS0-120   NS0-120   NS0-120

NO.7 Which option of the exportfs command will temporarily export a resource while ignoring the options
specified in the /etc/exports file?
A.exportfs exportfs ?
B.exportfs -i
Answer:B

Network Appliance   certification NS0-120   NS0-120   NS0-120 examen

NO.8 If an NFS client attempts and fails to access a file opened by a CIFS application, which of the following
commands would you use to view the connection?
A.cifs audit
B.cifs sessions
C.cifs shares
D.cifs lookup
Answer:B

Network Appliance   NS0-120 examen   NS0-120   NS0-120

NO.9 Which of the following definitions best represents the function of the cifs setup command?
A.Displays the mount point of all shared directories
B.Displays the names of all mounted directories on the storage appliance
C.Displays the prompts for CIFS configuration information
D.Displays a list of the users on the storage appliance
Answer:C

Network Appliance   certification NS0-120   certification NS0-120   NS0-120 examen

NO.10 Which of the following commands adds the share "netapp" to the /vol/vol2/home directory?
A.cifs shares dd netapp /vol/vol2/home cifs shares ?dd netapp /vol/vol2/home
B.cifs shares dd /vol/vol2/home/netapp cifs shares ?dd /vol/vol2/home/netapp
C.cifs shares dd netapp /vol/vol2 cifs shares ?dd netapp /vol/vol2
D.None of the above
Answer:A

Network Appliance examen   certification NS0-120   NS0-120   NS0-120 examen   NS0-120

NO.11 Which one of the following is NOT part of the UNIX security style?
A.GID
B.Other
C.SID
D.UID
Answer:C

Network Appliance examen   NS0-120   certification NS0-120   NS0-120

NO.12 Which one of the following commands would you use to set up the network interface?
A.ifstat
B.ping
C.ifconfig
D.traceroute
Answer:C

certification Network Appliance   certification NS0-120   NS0-120   certification NS0-120   NS0-120

NO.13 Which one of the following commands is NOT a good command for troubleshooting connectivity
problems from the storage appliance console?
A.ping
B.ifstat
C.netdiag
D.iostat
Answer:D

Network Appliance   certification NS0-120   NS0-120 examen

NO.14 NTFS allows file access based on ___________.
A.NT ACLs and UNIX permissions
B.SID and password
C.NT ACLs and SID
D.UNIX permissions
Answer:C

Network Appliance   NS0-120   NS0-120   NS0-120   NS0-120 examen

NO.15 If the client is a CIFS client, locks are __________.
A.Advisory
B.Mandatory
C.Ordered
D.Optional
Answer:B

certification Network Appliance   NS0-120 examen   certification NS0-120   NS0-120 examen

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Network Appliance NS0-120. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de NS0-120, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

L'avènement de la certification Network Appliance pratique d'examen NS0-154 questions et réponses

Le programme de formation Network Appliance NS0-154 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification Network Appliance NS0-154. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test Network Appliance NS0-154. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.

Un bon choix de l'outil à se former est le point essentiel à passer le test Network Appliance NS0-154, et les documentations à propos de rechercher le test Network Appliance NS0-154 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Les produits de Pass4Test sont préparés pour le test Certification Network Appliance NS0-154, y compris les formations et les informations ciblées au test Network Appliance NS0-154. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Code d'Examen: NS0-154
Nom d'Examen: Network Appliance (Data ONTAP 8.0 7-Mode Administrator)
Questions et réponses: 148 Q&As

NS0-154 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-154.html

NO.1 Which three protocols can coexist on a NetApp storage system? (Choose three.)
A.CIFS
B.DAFS
C.DFS
D.FCP
E.NFS
Answer: ADE

Network Appliance   NS0-154 examen   NS0-154   NS0-154

NO.2 Data ONTAP 8.0 7-Mode supports SMB 2.0 in Windows Vista and Windows Server 2008.
A.True
B.False
Answer: B

Network Appliance   certification NS0-154   NS0-154   certification NS0-154   NS0-154   NS0-154 examen

NO.3 Which three items are NFS resources for export? (Choose three.)
A.aggregate
B.directory/qtree
C.file
D.subnet
E.volume
Answer: BCE

Network Appliance   NS0-154   certification NS0-154   NS0-154

NO.4 Which are three characteristics of an iSCSI or FCP SAN implementation? (Choose three.)
A.A LUN can be converted into a VLD.
B.LUNs can be accessed using the FCP protocol.
C.LUNs can be accessed using the iSCSI protocol.
D.Block services are associated with an iSCSI or FCP SAN environment.
Answer: BCD

Network Appliance examen   NS0-154 examen   NS0-154 examen

NO.5 In a tape environment after a SnapRestore reversion of a volume, incremental backup and restore
operations on the file or volume cannot rely on the timestamps to determine what data needs to be
backed up or restored. Which course of action ensures correct incremental backups?
A.Perform a base-level backup of the volume after you restore it.
B.Reboot the storage system to reset timestamps back to their original times before the reversion.
C.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup.
D.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup,
and then perform a base-level backup of the volume after you restore it.
Answer: A

Network Appliance   NS0-154 examen   NS0-154 examen

NO.6 NTFS allows file access based on ___________.
A.NT ACLs and SID.
B.NT ACLs and UNIX permissions.
C.SID and password.
D.UNIX permissions.
Answer: A

Network Appliance   NS0-154 examen   NS0-154   NS0-154 examen

NO.7 What utility on the storage system will allow you to capture network packet information?
A.netstats
B.pktt
C.snoop
D.traceroute
Answer: B

Network Appliance   NS0-154 examen   NS0-154

NO.8 Which two commands on the storage system allow you to gather detailed statistics about network
interfaces, including basic information about network connections? (Choose two.)
A.ifstat -a
B.netdiag -n
C.netstat -i
D.sysstat 1
Answer: AC

Network Appliance examen   certification NS0-154   certification NS0-154   NS0-154 examen

NO.9 Which changes the NDMP password on the Open System SnapVault agent?
A.password
B.password
C.svpasswd
D.svpassword
Answer: D

Network Appliance   NS0-154   NS0-154

NO.10 To configure a storage system as a member of a Windows active directory domain, the time on the
storage system must be set to be within plus or minus five minutes of the time on the domain controller.
A.True
B.False
Answer: A

Network Appliance examen   certification NS0-154   NS0-154   NS0-154 examen   NS0-154 examen

NO.11 Which two commands can be used to enable LUN reservations? (Choose two.)
A.lun create
B.lun map
C.lun reservation set
D.lun set reservation
Answer: AD

Network Appliance examen   NS0-154   certification NS0-154   certification NS0-154

NO.12 Which two will allow you to read and analyze a packet trace file generated by the storage system?
(Choose two.)
A.Eternal View
B.Netmon
C.pktt
D.WireShark
Answer: BD

certification Network Appliance   certification NS0-154   NS0-154   NS0-154 examen   NS0-154 examen

NO.13 To determine the version of Data ONTAP in which a bug has been fixed, use the NOW site _______
utility. (Choose two.)
A.AutoSupport
B.Bugs Online
C.NetApp Diagnostics
D.Release Comparison
E.System Configuration Guide
Answer: BD

certification Network Appliance   NS0-154   NS0-154 examen   certification NS0-154

NO.14 An iSCSI or FC SAN implementation provides _____ access to LUNs.
A.block
B.file
C.VIIP
D.VLD
Answer: A

Network Appliance   NS0-154   NS0-154 examen   NS0-154

NO.15 Which three licenses are required for fabric-attached MetroCluster? (Choose three.)
A.Cluster
B.Cluster_remote
C.Syncmirror_local
D.Syncmirror_fabric
E.Syncmirror_remote
Answer: ABC

Network Appliance   NS0-154 examen   NS0-154

NO.16 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A.FilerA:source_vol FilerB:destination_vol - sync
B.FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C.FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D.FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   NS0-154   certification NS0-154   NS0-154

NO.17 Which set of protocols provide block-level access to NetApp storage?
A.CIFS and NFS
B.HTTP and FTP
C. iSCSI and FCP
D.SNA and RPC
Answer: C

Network Appliance   NS0-154 examen   NS0-154

NO.18 For automatic user name mapping to occur for a CIFS and UNIX user name that are the same, you
must do what?
A.Enter the CIFS user in the NIS database.
B.Enter the user names in the /etc/hosts.equiv file.
C.Use both a NIS server and a Domain Controller in the network.
D.Nothing: mapping will occur if user name authentication is available.
Answer: D

Network Appliance   NS0-154 examen   NS0-154 examen   NS0-154   NS0-154 examen   certification NS0-154

NO.19 If the security style is set to UNIX, CIFS client file access is determined by ___________ .
A.NT ACLs
B.the last client to set permissions
C.the mapped UNIX UID/GID of the CIFS client and the UNIX file permissions
D.This is not allowed: A CIFS client cannot access files in a path set to a security style of UNIX
Answer: C

Network Appliance   certification NS0-154   NS0-154 examen   NS0-154

NO.20 Host multi-pathing describes a _________ solution that has at least two distinct _________ paths to a
LUN.
A.FC or IP SAN, physical
B.FC or IP SAN, virtual
C.FC SAN, virtual
D.token ring, physical
Answer: A

Network Appliance examen   NS0-154   NS0-154 examen

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Network Appliance NS0-154 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Network Appliance NS0-154.

Le meilleur matériel de formation examen Microsoft 70-648

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 70-648 à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 70-648 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft 70-648, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Microsoft 70-648 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Microsoft 70-648, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

Code d'Examen: 70-648
Nom d'Examen: Microsoft (TS: Upgrading MCSA on Windows serv 2003 to Windows Serv 2008)
Questions et réponses: 428 Q&As

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Microsoft 70-648. Ce ne sera pas un problème à réussir le test Microsoft 70-648 si vous préparez le test avec notre guide d'étude.

70-648 Démo gratuit à télécharger: http://www.pass4test.fr/70-648.html

NO.1 Your company has a main office and a branch office. The company has a single-domain Active
Directory forest.
The main office has two domain controllers named DC1 and DC2 that run Windows Server 2008 R2. The
branch office has a Windows Server 2008 R2 read-only domain controller (RODC) named DC3. All
domain controllers hold the DNS Server server role and are configured as Active Directory-integrated
zones. The DNS zones only allow secure updates.
You need to enable dynamic DNS updates on DC3.
What should you do?
A. Run the Ntdsutil.exe DS Behavior commands on DC3.
B. Run the Dnscmd.exe /ZoneResetType command on DC3.
C. Reinstall Active Directory Domain Services on DC3 as a writable domain controller.
D. Create a custom application directory partition on DC1. Configure the partition to store Active
Directory-integrated zones.
Answer: C

Microsoft   certification 70-648   70-648 examen   70-648   70-648 examen

NO.2 Note : This is part of a series of questions that use the same set of answer choices. Each answer
choice may be used once, more than once, or not at all.
Your network contains an enterprise certification authority (CA) that runs Windows Server 2008 R2
Enterprise.
You have a custom certificate template named Template1. Template1 is published to the CA.
You need to ensure that all of the members of a group named Group1 can enroll for certificates that use
Template1.
Which snap-in should you use?
A. Security Templates
B. Group Policy Management
C. Certificate Templates
D. Certificates
E. TPM Management
F. Active Directory Users and Computers
G. Certification Authority
H. Enterprise PKI
I. Authorization Manager
Answer: C

certification Microsoft   70-648 examen   70-648

NO.3 Your company, Contoso, Ltd., has a main office and a branch office. The offices are connected by a
WAN link. Contoso has an Active Directory forest that contains a single domain named ad.contoso.com.
The ad.contoso.com domain contains one domain controller named DC1 that is located in the main office.
DC1 is configured as a DNS server for the ad.contoso.com DNS zone. This zone is configured as
a standard primary zone.
You install a new domain controller named DC2 in the branch office. You install DNS on DC2. You need to
ensure that the DNS service can update records and resolve DNS queries in the event that a WAN link
fails.
What should you do?
A. Create a new stub zone named ad.contoso.com on DC2.
B. Configure the DNS server on DC2 to forward requests to DC1.
C. Create a new secondary zone named ad.contoso.com on DC2.
D. Convert the ad.contoso.com zone on DC1 to an Active Directory-integrated zone.
Answer: D

certification Microsoft   70-648   70-648   certification 70-648   70-648 examen   70-648

NO.4 Note : This is part of a series of questions that use the same set of answer choices. Each answer choice
may be used once, more than once, or not at all.
Your network contains an Active Directory domain. All domain controllers run Windows Server 2008 R2.
You need to compact the Active Directory database.
What should you do?
A. Run the repadmin.exe command.
B. Create a Data Collector Set (DCS).
C. Run the dsamain.exe command.
D. Configure the Active Directory Diagnostics Data Contoller Set (DCS).
E. Run the ntdsutil.exe command.
F. Create custom views from Event Viewer.
G. Run the Get-ADForest cmdlet.
H. Run the dsquery.exe command.
I. Configure subscriptions from Event Viewer.
J. Run the eventcreate.exe command.
Answer: E

certification Microsoft   70-648   certification 70-648

NO.5 You have an enterprise subordinate certification authority (CA). The CA issues smart card logon
certificates. Users are required to log on to the domain by using a smart card. Your company's corporate
security policy states that when an employee resigns, his ability to log on to the network must be
immediately revoked. An employee resigns. You need to immediately prevent the employee from logging
on to the domain. What should you do?
A. Revoke the employee's smart card certificate.
B. Disable the employee's Active Directory account.
C. Publish a new delta certificate revocation list (CRL).
D. Reset the password for the employee's Active Directory account.
Answer: B

certification Microsoft   certification 70-648   certification 70-648   70-648   70-648   certification 70-648

NO.6 You have a server named Server1 that has the following Active Directory Certificate Services (AD CS)
role services installed:
-Enterprise root certification authority (CA)
-Certificate Enrollment Web Service
-Certificate Enrollment Policy Web Service
You create a new certificate template. External users report that the new template is unavailable when
they request a new certificate. You verify that all other templates are available to the external users. You
need to ensure that the external users can request certificates by using the new template.
What should you do on Server1?
A. Run iisreset.exe /restart.
B. Run gpupdate.exe /force.
C. Run certutil.exe -dspublish.
D. Restart the Active Directory Certificate Services service.
Answer: A

certification Microsoft   certification 70-648   70-648   70-648   70-648

NO.7 Your network contains an enterprise root certification authority (CA). You need to ensure that a
certificate issued by the CA is valid.
What should you do?
A. Run syskey.exe and use the Update option.
B. Run sigverif.exe and use the Advanced option.
C. Run certutil.exe and specify the -verify parameter.
D. Run certreq.exe and specify the -retrieve parameter.
Answer: C

Microsoft   70-648   certification 70-648   70-648 examen   70-648

NO.8 Your network contains an Active Directory domain. The relevant servers in the domain are configured as
shown in the following table:
You need to ensure that all device certificate requests use the MD5 hash algorithm. What should you do?
A. On Server2, run the Certutil tool.
B. On Server1, update the CEP Encryption certificate template.
C. On Server1, update the Exchange Enrollment Agent (Offline Request) template.
D. On Server3, set the value of the HKLM\Software\Microsoft\Cryptography\MSCEP\HashAlgorithm
\HashAlgorithm registry key.
Answer: D

Microsoft   70-648   70-648   certification 70-648   70-648

NO.9 Note : This is part of a series of questions that use the same set of answer choices. Each answer choice
may be used once, more than once, or not at all.
Your network contains an enterprise certification authority (CA) that runs Windows Server 2008 R2
Enterprise.
You enable key archival on the CA. The CA is configured to use custom certificate templates for
Encrypted File System (EFS) certificates.
You need to archieve the private key for all new EFS certificates.
Which snap-in should you use?
A. TPM Management
B. Enterprise PKI
C. Active Directory Users and Computers
D. Certificates
E. Group Policy Management
F. Certificate Templates
G. Certification Authority
H. Security Templates
I. Authorization Manager
Answer: F

certification Microsoft   70-648 examen   70-648   70-648   70-648 examen

NO.10 Your network contains an Active Directory domain. You have a server named Server1 that runs
Windows Server 2008 R2. Server1 is an enterprise root
certification authority (CA). You have a client computer named Computer1 that runs Windows 7. You
enable automatic certificate
enrollment for all client computers that run Windows 7. You need to verify that the Windows 7 client
computers can automatically enroll for certificates. Which command should you run on Computer1?
A. certreq.exe -retrieve
B. certreq.exe -submit
C. certutil.exe -getkey
D. certutil.exe -pulse
Answer: D

certification Microsoft   70-648   70-648 examen   70-648

NO.11 Note : This is part of a series of questions that use the same set of answer choices. Each answer choice
may be used once, more than once, or not at all.
Your network contains an enterprise certification authority (CA) that runs Windows Server 2008 R2
Enterprise.
You need to approve a pending certificate request.
Which snap-in should you use?
A. Active Directory Users and Computers.
B. Certificate Templates
C. TPM Management
D. Enterprise PKI
E. Authorization Manager
F. Certificates
G. Certification Authority
H. Security Templates
I. Group Policy Management
Answer: G

Microsoft   70-648   70-648 examen   certification 70-648

NO.12 Note : This is part of a series of questions that use the same set of answer choices. Each answer choice
may be used once, more than once, or not at all.
Your network contains an Active Directory domain. All domain controllers run Windows Server 2008 R2.
You mount an Active Directory snapshot.
You need to ensure that you can query the snapshot by using LDAP.
What should you do?
A. Run the repadmin.exe command.
B. Create custom views from Event Viewer.
C. Run the eventcreate.exe command.
D. Create a Data Collector Set (DCS).
E. Run the dsamain.exe command.
F. Run the ntdsutil.exe command.
G. Run the dsquery.exe command.
H. Configure the Active Directory Diagnostics Data Collector Set (DCS).
I. Configure subscriptions from Event Viewer.
J. Run the Get-ADForest cmdlet.
Answer: E

certification Microsoft   certification 70-648   70-648   certification 70-648

NO.13 Your company has two domain controllers that are configured as internal DNS servers. All zones on
the DNS servers are Active Directory-integrated zones. The zones allow all dynamic updates. You
discover that the contoso.com zone has multiple entries for the host names of computers that do not exist.
You need to configure the contoso.com zone to automatically remove expired records.
What should you do?
A. Enable only secure updates on the contoso.com zone.
B. Enable scavenging and configure the refresh interval on the contoso.com zone.
C. From the Start of Authority tab, decrease the default refresh interval on the contoso.com zone.
D. From the Start of Authority tab, increase the default expiration interval on the contoso.com zone.
Answer: B

certification Microsoft   70-648   70-648   70-648 examen

NO.14 Your network contains a server that runs Windows Server 2008 R2. The server is configured as an
enterprise root certification authority (CA). You have a Web site that uses x.509 certificates for
authentication. The Web site is configured to use a many-to-one mapping.
You revoke a certificate issued to an external partner. You need to prevent the external partner from
accessing the Web site. What should you do?
A. Run certutil.exe -crl.
B. Run certutil.exe -delkey.
C. From Active Directory Users and Computers, modify the membership of the IIS_IUSRS group.
D. From Active Directory Users and Computers, modify the Contact object for the external partner.
Answer: A

Microsoft   certification 70-648   70-648 examen   70-648   70-648   certification 70-648

NO.15 You add an Online Responder to an Online Responder Array. You need to ensure that the new Online
Responder resolves synchronization conflicts for all members of the Array. What should you do?
A. From Network Load Balancing Manager, set the priority ID of the new Online Responder to 1.
B. From Network Load Balancing Manager, set the priority ID of the new Online Responder to 32.
C. From the Online Responder Management Console, select the new Online Responder, and then select
Set as Array Controller.
D. From the Online Responder Management Console, select the new Online Responder, and then select
Synchronize Members with Array Controller.
Answer: C

Microsoft   70-648   70-648

NO.16 Note : This is part of a series of questions that use the same set of answer choices. Each answer choice
may be used once, more than once, or not at all.
Your network contains an Active Directory domain. All domain controllers run Windows Server 2008 R2.
You need to create a snapshot of Active Directory.
What should you do?
A. Configure subscriptions from Event Viewer.
B. Create custom views from Event Viewer.
C. Create a Data Collector Set (DCS).
D. Run the dsquery.exe command.
E. Run the dsamain.exe command.
F. Configure the Active Directory Diagnostics Data Controller Set (DCS).
G. Run the repadmin.exe command.
H. Run the ntdsutil.exe command.
I. Run the eventcreate.exe command.
J. Run the GET-ADForest cmdlet.
Answer: H

Microsoft examen   70-648   70-648   certification 70-648   70-648

NO.17 Your company has an Active Directory domain named contoso.com. The company network has two
DNS servers named DNS1 and DNS2.
The DNS servers are configured as shown in the following table:
Domain users, who are configured to use DNS2 as the preferred DNS server, are unable to connect to
Internet Web sites.
You need to enable Internet name resolution for all client computers. What should you do?
A. Create a copy of the .(root) zone on DNS1.
B. Update the list of root hints servers on DNS2.
C. Update the Cache.dns file on DNS2. Configure conditional forwarding on DNS1.
D. Delete the .(root) zone from DNS2. Configure conditional forwarding on DNS2.
Answer: D

Microsoft   70-648   70-648

NO.18 Your company has a main office and five branch offices that are connected by WAN links. The
company has an Active Directory domain named contoso.com. Each branch office has a member server
configured as a DNS server. All branch office DNS servers host a secondary zone for contoso.com.
You need to configure the contoso.com zone to resolve client queries for at least four days in the event
that a WAN link fails.
What should you do?
A. Configure the Expires after option for the contoso.com zone to 4 days.
B. Configure the Retry interval option for the contoso.com zone to 4 days.
C. Configure the Refresh interval option for the contoso.com zone to 4 days.
D. Configure the Minimum (default) TTL option for the contoso.com zone to 4 days.
Answer: A

Microsoft   certification 70-648   certification 70-648   70-648   70-648 examen   70-648

NO.19 Your network contains an Active Directory domain. The domain contains two domain controllers named
DC1 and DC2.
You perform a full backup of the domain controllers every night by using Windows Server Backup.
You update a script in the SYSVOL folder. The new script fails to run properly.
You need to restore the previous version of the script in the SYSVOL folder. The solution must minimize
the amount of time required to restore the script.
What should you do first?
A. Run the Restore-ADObject cmdlet.
B. Restore the system state to its original location.
C. Run the NTDSUtil.exe command-line tool.
D. Attach the VHD file created by Windows Server Backup.
Answer: D

certification Microsoft   certification 70-648   70-648

NO.20 Your network contains two Active Directory forests named contoso.com and adatum.com. The
functional level of both forests is Windows Server 2008 R2. Each forest contains one domain. Active
Directory Certificate Services (AD CS) is configured in the contoso.com forest to allow users from both
forests to automatically enroll user certificates.
You need to ensure that all users in the adatum.com forest have a user certificate from the contoso.com
certification authority (CA).
What should you configure in the adatum.com domain?
A. From the Default Domain Controllers Policy, modify the Enterprise Trust settings.
B. From the Default Domain Controllers Policy, modify the Trusted Publishers settings.
C. From the Default Domain Policy, modify the Certificate Enrollment policy.
D. From the Default Domain Policy, modify the Trusted Root Certification Authority settings.
Answer: C

certification Microsoft   certification 70-648   70-648

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-648 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Les meilleures Microsoft 111-056 examen pratique questions et réponses

Le test Microsoft 111-056 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Microsoft 111-056 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 111-056, et les documentations à propos de rechercher le test Microsoft 111-056 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 111-056. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Si vous vous inscriez le test Microsoft 111-056, vous devez choisir une bonne Q&A. Le test Microsoft 111-056 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Code d'Examen: 111-056
Nom d'Examen: Microsoft (TS:MS.NET Framework 2.0 - Distributed Application Developm)
Questions et réponses: 240 Q&As

Le Certificat de Microsoft 111-056 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Microsoft 111-056, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 111-056 sans aucun éffort, en même temps, le test de Microsoft 111-056 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Microsoft 111-056 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

111-056 Démo gratuit à télécharger: http://www.pass4test.fr/111-056.html

NO.1 You create a .NET Framework remoting application that provides stock information to
customers. The server component raises an event on the client computer when certain conditions
are met. You need to ensure the server raises exactly one event for each client application that is
registered for the event. What should you do?
A. Configure the server class as a Singleton Server Activated Object (SAO) and check for
duplicate client delegate methods before raising the event.
B. Configure the server class as a Client Activated Object (CAO) and override the CreateObjRef
method to check for duplicate client delegate methods before raising the event.
C. Configure the server class as a SingleCall Server Activated Object (SAO) and check for
duplicate client delegate methods before raising the event.
D. Configure the server class as a Client Activated Object (CAO) and check for duplicate client
delegate methods before raising the event.
Answer: A

Microsoft examen   111-056   111-056   111-056 examen   111-056

NO.2 A class library named MathLib contains the following code.public class MathClass :
MarshalByRefObject { public decimal DoHugeCalculation(int iterations) { decimal result;
//Some very lengthy calculations ... return result; }}The MathLib class is hosted in a .NET
Framework remoting server application. A Windows application project running on a client
computer contains the following class.public class MathClient { public void
ProcessHugeCalculation(int iterations)
{ MathClass cm = new MathClass(); decimal decRes = cm.DoHugeCalculation(iterations);
//process the result ... }}The MathClient class must call the MathClass class asynchronously
by using remoting. A callback must be implemented to meet this requirement. You need to
complete the implementation of the MathClient class. What should you do?
A. Modify the MathClient class as follows:public class MathClient {public delegate void
DoHugeCalculationDelegate(decimal result);public event DoHugeCalculationDelegate
DoHugeCalculationResult;public void DoHugeCalculationHandler(decimal result)
{DoHugeCalculationResult(result);} public void ProcessHugeCalculation(int iterations) {
//Hook up event handler here... ... }}
B. Apply the Serializable attribute to the MathClient class.
C. Modify the MathClient class as follows:public class MathClient { private delegate decimal
DoHugeCalculationDelegate(int iterations); private void
DoHugeCalculationCallBack(IAsyncResult res) { AsyncResult aRes = (AsyncResult)res;
decimal decRes = ((DoHugeCalculationDelegate)aRes. AsyncDelegate).EndInvoke(res);
//process the result ... } public void ProcessHugeCalculation(int iterations) { MathClass cm
= new MathClass(); DoHugeCalculationDelegate del = new
DoHugeCalculationDelegate( cm.DoHugeCalculation);
del.BeginInvoke(iterations, new
AsyncCallback( DoHugeCalculationCallBack), null); }}
D. Apply the OneWay attribute to all methods in the MathClass class.
Answer: C

Microsoft   111-056 examen   certification 111-056   111-056   111-056

NO.3 You are converting an application to use .NET Framework remoting. The server portion of the
application monitors stock prices and contains a class named StockPriceServer, which is a Server
Activated Object (SAO). The client computer interacts with the server using a common
assembly. When the server attempts to raise an event on the client computer, the server throws
the following exception.System.IO.FileNotFoundException.You discover that the event delegate
is not being called on the client computer. You need to ensure that the server application can
raise the event on the client computer. What should you do?
A. Add the Serializable attribute to the StockPriceServer class and change the event to use one of
the standard common language runtime (CLR) delegates.
B. In the common assembly, add an interface that contains the event and a method to raise the
event. Implement that interface in the StockPriceServer class and use the interface's event to
register the delegate message on the client computer.
C. Add the event delegate to the common assembly. Implement the Add delegate and the
Remove delegate methods of the event in the StockPriceServer class to reference the delegate
method in the client application.
D. Raise the event using the BeginInvoke method and pass a reference to the client computer.
Answer: B

Microsoft examen   certification 111-056   111-056

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Microsoft 111-056. Les documentations particulièrement visée au test Microsoft 111-056 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Microsoft 111-056.

L'avènement de la certification Microsoft pratique d'examen 70-294 questions et réponses

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Microsoft 70-294.

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Est-ce que vous vous souciez encore de réussir le test Microsoft 70-294? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: 70-294
Nom d'Examen: Microsoft (Planning, Implementing, and Maintaining a Microsoft Windows Server 2003 AD Infrastructure)
Questions et réponses: 220 Q&As

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-294 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Microsoft 70-294. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Microsoft 70-294.

70-294 Démo gratuit à télécharger: http://www.pass4test.fr/70-294.html

NO.1 Your company has a single Active Directory directory service forest with multiple domains. The
Schema FSMO role is held by one of the domain controllers in the forest root domain. The Domain
Naming Master FSMO role is held by one of the domain controllers in a child domain. All domain
controllers have Windows Server 2003 installed.
You need to upgrade all domain controllers to Windows Server 2003 R2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Run the adprep /forestprep command in the forest root domain.
B. Run the adprep /forestprep command in all the child domains.
C. Run the adprep /domainprep command in all the child domains only.
D. Run the adprep /domainprep command in all domains.
Answer: AD

certification Microsoft   70-294   certification 70-294   certification 70-294

NO.2 Your company has a single Active Directory directory service forest named contoso.com. A partner
organization has a forest named fabrikam.com. You create a forest trust relationship between
contoso.com and fabrikam.com.
You need to enable selective authentication between contoso.com and fabrikam.com.
Which tool should you use?
A. Netdom
B. Nltest
C. Dsacls
D. Ntdsutil
Answer: A

Microsoft   certification 70-294   70-294   70-294 examen

NO.3 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain.
The company has a high rate of employee turnover, and administrators create several hundred user
accounts per week.
A domain controller in the child domain fails. Within several hours of the failure, administrators are unable
to create new user accounts within the child domain.
You need to ensure that administrators can create user accounts in the child domain.
What should you do?
A. Seize the PDC Emulator role in the child domain.
B. Seize the RID Master role in the child domain.
C. Seize the Infrastructure Master role in the child domain.
D. Create a new domain controller in the child domain, and configure it as a global catalog server.
Answer: B

certification Microsoft   70-294   70-294

NO.4 You have a single Active Directory directory service domain. Your company has a main office and
multiple branch offices. Each office has an Active Directory site. The company s network is not fully
routed.
You need to ensure complete replication between the Active Directory sites.
What should you do?
A. Configure site links, and disable site link bridging.
B. Configure site links to use the SMTP transport, and enable site link bridging.
C. Configure a preferred bridgehead server for each branch office site.
D. Configure a preferred bridgehead server for the main office site.
Answer: A

Microsoft examen   70-294   70-294   70-294 examen   70-294

NO.5 Your Windows Server 2003 environment consists of a single Active Directory directory service forest
with multiple domains. The forest functional level is set to Windows 2000 Server. Your company has a
main office and four branch offices. Each office has two domain controllers. The domain controllers in the
main office are global catalog servers.
In the branch offices, searches for some printers in Active Directory are slow.
You need to improve the performance of Active Directory printer searches in the four branch offices.
What should you do?
A. Enable universal group membership caching in each branch office.
B. Increase the number of domain controllers in each branch office.
C. Add global catalog services to each branch office.
D. Upgrade the forest functional level to Windows Server 2003.
Answer: C

certification Microsoft   certification 70-294   70-294

NO.6 Your company has a Windows Server 2003 environment with a single Active Directory directory service
forest. The forest has multiple domains and two sites named Site1 and Site2. Site1 has six domain
controllers. Two of the domain controllers are global catalog servers. Site2 has three domain controllers.
The WAN link between Site1 and Site2 is slow.
You are preparing the environment for an Active Directory application that requires universal group
membership to make authorization decisions. Application servers will be located in Site1 and Site2.
You need to prepare the Active Directory environment for the introduction of the Active Directory
application.
What should you do?
A. Increase the number of domain controllers in Site2 to four.
B. Enable universal group membership caching in Site1.
C. Add additional global catalog servers to Site1.
D. Configure at least one of the domain controllers in Site2 to be a global catalog server.
Answer: D

Microsoft   70-294   70-294 examen   certification 70-294   70-294

NO.7 Your company has a single Active Directory directory service forest with multiple domains. The
company has a main office with 1,000 users and a single branch office with 500 users. Each office is a
separate Active Directory site. The main office Active Directory site has two domain controllers with Global
Catalog services.
Company employees must be able to work in both offices.
You need to plan the placement and configuration of domain controllers.
What should you do?
A. Deploy two additional domain controllers in the main office Active Directory site.
B. Deploy global catalog servers in the branch office Active Directory site.
C. Enable change notification on the site link between the main office Active Directory site and the branch
office Active Directory site.
D. Disable change notification on the site link between the main office Active Directory site and the branch
office Active Directory site.
Answer: B

Microsoft   certification 70-294   70-294

NO.8 Your company has a single Active Directory directory service forest with three domains.
You plan to modify the Active Directory schema.
You need to identify the schema master for the forest.
What should you do?
A. Run the regsvr32 schmmgmt.dll command. Use the Active Directory Domains and Trusts snap-in.
B. Run the regsvr32 schmmgmt.dll command. Use the Active Directory Users and Computers snap-in.
C. Use the Dsget command-line tool.
D. Use the Dsquery command-line tool.
Answer: D

Microsoft   70-294   70-294   70-294 examen   70-294 examen   certification 70-294

NO.9 You have a single Active Directory directory service domain. Your domain controllers are configured as
shown in the following table.
Domain
controller
Site FSMO role or roles
Global catalog
server
DC1 Site1
Schema Master
Domain Naming Master
Yes
DC2 Site2 ? Yes
DC3 Site3 Infrastructure Master Yes
DC4 Site4 PDC Emulator No
File and print services are on servers in Site1. Microsoft Exchange Server is installed on servers in Site2.
The HR and user provisioning applications will be placed on servers in Site3.
You are planning placement of the RID Master FSMO role.
You need to ensure proper functionality of these applications within their sites during an extended WAN
outage.
On which domain controller should you place the RID Master role?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: C

Microsoft   70-294   70-294 examen   70-294   certification 70-294

NO.10 Your company has an Active Directory directory service forest with a forest root domain and a child
domain. You have two Active Directory sites named Site1 and Site2. The two sites represent physical
locations that are connected by a WAN link.
All domain controllers are located in Site2. All users log on to the child domain. Several users in Site1 use
computers that run Windows NT 4.0 operating systems.
You configure a new domain controller for each domain, and you place the new domain controllers in
Site1.
You need to ensure that all users in Site1 can change their passwords in the event of a WAN link failure.
What should you do?
A. Transfer the root domain PDC Emulator role to a domain controller in Site1.
B. Transfer the child domain PDC Emulator role to a domain controller in Site1.
C. Transfer the root domain Infrastructure Master role to a domain controller in Site1.
D. Transfer the child domain Infrastructure Master role to a domain controller in Site1.
Answer: B

Microsoft   70-294   70-294 examen   70-294 examen

NO.11 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain. The child domain is set to the default domain functional level.
You install a second domain controller in the child domain by promoting a server named SVR1.
You need to rename SVR1 to DC2, and you must ensure that there will be no interruption in the ability of
client computers to authenticate to DC2, except during reboot.
What should you do?
A. Raise the domain functional level of the child domain to Windows 2000 native. Use System Properties
on SVR1 to rename SVR1 to DC2.
B. Raise the domain functional level of the child domain to Windows Server 2003. Run the netdom
command to rename SVR1 to DC2.
C. Raise the domain functional level of the child domain to Windows 2000 native. Run the dcpromo
command on SVR1 to remove Active Directory directory service. Use System Properties to rename SVR1
to DC2. Run the dcpromo command to re-install Active Directory.
D. Raise the domain functional level of the child domain to Windows Server 2003. Create a DNS CNAME
record for DC2.contoso.com that points to SVR1.contoso.com.
Answer: B

Microsoft   certification 70-294   certification 70-294   70-294

NO.12 You have a single Active Directory directory service domain. There is a branch office that connects to
the main office through a low-bandwidth WAN link.
The first domain controller is named DC1 and is located in the main office. The branch office has a single
server named Server1. Server1 runs Windows Server 2003.
You are preparing to install Active Directory on Server1. You back up the system state of DC1, and you
send the backup to the administrator at the branch office.
You need to make Server1 an additional domain controller in your domain, while minimizing the
bandwidth usage between the two offices.
What should you do?
A. Restore the system state data from DC1 to an alternate location on Server1. Run the dcpromo
command with the /adv parameter, and select the From these restored backup files option.
B. Restore the system state data from DC1 to the original location on Server1. Run the dcpromo
command with the /adv parameter, and select the From these restored backup files option.
C. Create a new Active Directory site. Create an unattended installation file with the
CriticalReplicationOnly parameter. Run the dcpromo command with the /answer parameter.
D. Create a new Active Directory site. Create an unattended installation file with the SiteName parameter
to place Server1 into the new site. Run the dcpromo command with the /answer parameter.
Answer: A

Microsoft   70-294 examen   certification 70-294

NO.13 Your company has a single Active Directory directory service forest with four domains. The domains
are named contoso.com, corp.contoso.com, fabrikam.com, and corp.fabrikam.com.
Users in the corp.contoso.com domain frequently access resources that are located in the
corp.fabrikam.com domain.
You need to improve user logon times from the corp.contoso.com domain to the corp.fabrikam.com
domain.
What should you do?
A. Enable universal group caching in sites where corp.contoso.com domain controllers are located.
B. Enable universal group caching in sites where corp.fabrikam.com domain controllers are located.
C. Create a shortcut trust from the corp.fabrikam.com domain to the corp.contoso.com domain.
D. Create a shortcut trust from the corp.contoso.com domain to the corp.fabrikam.com domain.
Answer: C

Microsoft   70-294 examen   70-294   certification 70-294   70-294

NO.14 Your company has a single Active Directory directory service forest with a forest root domain and a
child domain. The company has a main office and several branch offices. You are planning to remove the
child domain.
All of the domain controllers in the forest root domain are located in the main office, and all FSMO roles
are on separate domain controllers. The last domain controller in the child domain is named DC1 and is
located in a branch office.
You attempt to remove Active Directory from DC1, but you receive an error message stating that the
operation could not be completed.
You need to remove Active Directory from DC1.
What should you do?
A. Restore connectivity to the domain controller that holds the Domain Naming Master role.
B. Restore connectivity to the domain controller that holds the Schema Master role.
C. Restore connectivity to the domain controller that holds the Infrastructure Master role.
D. Restore connectivity to the domain controller that holds the PDC Emulator role.
Answer: A

Microsoft examen   70-294   70-294   70-294 examen   70-294 examen

NO.15 Your company s Windows Server 2003 environment consists of a single Active Directory directory
service forest. The forest has multiple domains and three sites named Site1, Site2, and Site3. Site1 is the
main office and has four domain controllers. Two of the domain controllers are global catalog servers.
Site2 is a branch office with two domain controllers. Site3 is a branch office with a slow and unreliable
WAN link and two domain controllers.
You need to improve user logon performance for users in Site2 and Site3.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Enable change notification between Site1 and Site2.
B. Enable change notification between Site1 and Site3.
C. Implement universal group membership caching in Site2.
D. Implement universal group membership caching in Site3.
Answer: CD

certification Microsoft   certification 70-294   70-294   70-294 examen

NO.16 You have a single Active Directory directory service domain. You are preparing to create a child
domain. Your user account is in a global security group named Server Administrators. The Server
Administrators group is in the local Administrators group on all servers.
You need to install Active Directory on a server named Server1 to create the new child domain.
What should you do?
A. Have your user account added to the Domain Admins group.
B. Have your user account added to the Schema Admins group.
C. Have your user account added to the Enterprise Admins group.
D. Have your user account added to the Incoming Forest Trust Builders group.
Answer: C

certification Microsoft   70-294   70-294   certification 70-294

NO.17 Your company has a single Active Directory directory service domain with three domain controllers.
You need to move domain-wide FSMO roles to a different domain controller.
Which tool should you use?
A. Active Directory Domains and Trusts snap-in
B. Active Directory Sites and Services snap-in
C. Active Directory Users and Computers snap-in
D. Active Directory Schema snap-in
Answer: C

Microsoft   70-294 examen   70-294 examen   70-294 examen   70-294

NO.18 Your company has a single Active Directory directory service forest named contoso.com. A partner
organization has a forest named fabrikam.com. Both forests are set to the Windows 2000 forest functional
level. Domains named contoso.com and fabrikam.com are set to Windows 2000 Native Mode.
You plan to create a forest trust relationship between contoso.com and fabrikam.com.
You need to be able to configure selective authentication for the trust relationship.
What should you do?
A. Raise the forest functional level on contoso.com and fabrikam.com to Windows Server 2003.
B. Raise the domain functional level on contoso.com and fabrikam.com to Windows Server 2003.
C. Raise the domain functional level and the forest functional level on contoso.com to Windows Server
2003.
D. Raise the domain functional level and the forest functional level on fabrikam.com to Windows Server
2003.
Answer: A

certification Microsoft   70-294   70-294 examen

NO.19 Your company has a main office and a single branch office. The two offices are connected through a
WAN link. You have Active Directory directory service site objects for each office. Domain controllers are
associated with the appropriate site objects.
Users in the main office are currently authenticated by domain controllers in the branch office.
You need to ensure that users in the main office are authenticated by the domain controllers in the main
office.
What should you do?
A. Clear the Bridge all site links option.
B. Configure a preferred bridgehead server for the site for the main office.
C. Associate the subnets for the main office with the site for the main office.
D. Associate the subnets for the branch office with the site for the branch office.
Answer: C

certification Microsoft   certification 70-294   70-294   70-294

NO.20 Your company has a single Active Directory directory service domain. The company has five Active
Directory sites on the West coast and five Active Directory sites on the East coast. The West coast sites
and the East coast sites are in two separate hub-and-spoke configurations that are separated by a firewall.
All Active Directory replication between the West coast and East coast occurs between a single West
coast domain controller named WestDC1 and a single East coast domain controller named EastDC1.
You need to ensure that if WestDC1 fails, other West coast domain controllers continue to replicate with
each other, but not with East coast domain controllers.
What should you do?
A. Create site links between the West coast hub site and the West coast spoke sites.
B. Create a site link bridge between the West coast hub site and the East coast hub site.
C. Clear the Bridge all site links option and create a site link bridge for all the East coast sites.
D. Clear the Bridge all site links option and create a site link bridge for all the West coast sites.
Answer: D

Microsoft   70-294 examen   certification 70-294   70-294

Pour réussir le test Microsoft 70-294 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 70-294. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 70-294 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.