Le produit de Pass4Test peut assurer les candidats à réussir le test HP HP0-J66 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test HP HP0-J66 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test HP HP0-J66.
Le programme de formation HP HP0-J66 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Le test HP HP0-J66 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test HP HP0-J66 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat HP HP0-J66 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test HP HP0-J66 avec l'aide de Pass4Test.
Le test HP HP0-J66 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
Code d'Examen: HP0-J66
Nom d'Examen: HP (HP Storage Migration)
Questions et réponses: 75 Q&As
Pass4Test est un seul site de provider le guide d'étude HP HP0-J66 de qualité. Peut-être que vous voyiez aussi les Q&A HP HP0-J66 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
HP0-J66 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J66.html
NO.1 A customer needs to be able to recover their data in the event of a site failure.
They have a strict recovery point objective for their business-critical applications.
Which technique should the customer use?
A. snapshots
B. backups to tape
C. backups to disk
D. remote replication
Answer: D
HP examen HP0-J66 examen HP0-J66 HP0-J66
Explanation:
Need replication to get the data to a backup site.
Note:
*Recovery Point Objective (RPO) refers to the required point-in-time to which a DR solution
canrestore the state of data for a particular service, for example, how much data loss is
acceptablefollowing a disaster. These requirements can range from "close to zero" data loss (for
high-valuefinancial transactions, for example) to some small number of minutes of the most recent
NO.2 A customer with multiple HP 3PAR P10000 Storage Systems needs to move data between the
arrays. They need to ensure that the migration will not disrupt their applications, users, or services.
Which storage method should the customer use to achieve this goal?
A. point-in-time copies
B. backups to disk
C. storage federation
D. deduplication
Answer: C
HP certification HP0-J66 HP0-J66 HP0-J66 examen HP0-J66
Explanation:
Storage federation from HP enables the online non-disruptive movement of storage volumes
between arrays in a metro area. Unlike external storage virtualization appliances that add cost,
complexity and downtime, storage federation from HP creates a persistent pool of capacity using
native communication between system controllers.
NO.3 What are the benefits of migrating to an HP 3PAR StoreServ 7000?
A. Virtualizationof homogenous storage devices
B. increased efficiency through reduced capacity requirements
C. multi-tier storage availability in hyperscale enterprise platform
D. federated non-disruptive data mobility between third-party systems
Answer: D
HP HP0-J66 certification HP0-J66 HP0-J66 examen certification HP0-J66
Explanation:
HP 3PAR StoreServ 7000 Storageisthe only platform that offers the performance required to double
virtual machine (VM) density on your physical servers-guaranteed.
Store all of your data on a single system that supports advanced features such as storage federation
and automated tiering and enables you to start small and grow without disruption.
NO.4 As part of an upgrade of their existing infrastructure, a customer is considering replacing their
Fibre Channel host bus adapters (HBAs) and Ethernet converged network adapters (CNAs).
How can they expect to improve efficiency through this upgrade?
A. 3:1 port consolidation
B. path failover redundancy
C. greater aggregate throughput
D. cable reduction up to 75%
Answer: A
certification HP certification HP0-J66 certification HP0-J66 HP0-J66
Explanation:
The HP Dual Port Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet,
iSCSI, and Fibre Channel (FC) connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE)
and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre
Channel onto a converged network adapter, HP CNAs reduce the number of separate adapters and
cables required for your datacenter and also reduce operational, power and cooling costs while
preserving existing Ethernet and Fibre Channel infrastructure.
NO.5 Your customer has an existing HP StoreServ 7400 with four controllers. The array has only SSD
drives installed. What should you consider when sizing a solution which includes Adaptive
Optimization?
A. Ensure that 3% of the capacity and 30% of the performance can be delivered by the SAS disks.
B. Include SAS 10/15K disks in the configuration.
C. Add SSDs or nearline disks to a single node pair.
D. Size the nearline tier for 30% of the performance requirement.
Answer: B
HP HP0-J66 HP0-J66 HP0-J66 examen
Explanation:
Note:
*SAS stands for Serial Attached SCSI. Basically, a SAS drive utilizes the same form factor as a
SATA drive but has several high performance advantages. First of all, there's the platter speed.
While typical SATA drives operate at 7200RPM, a SAS drive operates at 10K or 15K. Although the
platter speed is double that of SATA, the MTBF (Mean Time Before Failure) remains at the
industry standard of 1.2 million hours.
*Make sure to define tier 0 to be on a higher performance level than tier 1, which in turn should be
higher performance than tier 2. For example, you may choose RAID 1 with SSDs for tier 0, RAID 5
with FC drives for tier 1 and RAID 6 with NL or SATA drives for tier 2.
*Best practices encourage you to begin your Adaptive Optimization configurations with your
application CPG starting with tier 1. For example, tier 1 could be CPG using your FC or SAS physical
disks. This allows you to add both higher and lower tier capabilities at a later date. If you don't have
higher or lower tier, you can add either or both at a later date by using a new CPG, such as tier 0
using SSDs or tier 2 using NL. Or, you could have CPG tiers with RAID 1 or RAID 5 and RAID 6. The
main point is that you should begin with middle CPG tier 1 when configuring Adaptive Optimization
with your application.
* Example: HP 3PAR Adaptive Optimization moved ~33 percent of the IOPS workload to the SSD
drives even though that involved moving only 1 percent of the space. Performance improved in two
ways: the 33 percent of the IOPS that were serviced by SSD drives got very good latencies (~2 ms),
and the latencies for the NL drives also improved (from ~40 ms to ~15 ms). Moreover, the
investment in the 16 SSD drives permitted them to add even more NL drives in the future, because
the SSD drives have both space and performance headroom remaining.
Reference;Adaptive Optimization for HP 3PAR StoreServ Storage
NO.6 A customer is planning to migrate from an HP EVA to an HP 3PAR StoreServ 7000 Storage
System The customer uses disk groups on the EVA for fine-grained database management.
What can the customer use to achieve fine-grained database management on the HP 3PAR
StoreServ 7000?
A. logical volumes
B. common provisioning groups
C. disk groups
D. virtual volumes
Answer: B
HP examen certification HP0-J66 HP0-J66 certification HP0-J66 HP0-J66 examen
Explanation:
Terminology comparison between EVA and HP 3PAR StoreServ EVA P6000:Disk Group HP 3PAR
StoreServ:Common Provisioning Group (CPG)
NO.7 A customer is planning to migrate their master database to a remote location. Their network
uses GbE for FCIP tunneling. Which Fibre Channel switch port interface must they use?
A. EX_Port
B. E_Port
C. VEX_Port
D. VE_Port
Answer: D
certification HP certification HP0-J66 HP0-J66 HP0-J66 HP0-J66
Explanation:
*VE_Port-Virtual E_Port used with a GbE port for FCIP tunneling
*You can configure a Fibre Channel port as an F_Port, FL_Port, E_Port, or EX_Port (Fibre Channel
routing),and configure a GbE port as a VE_Port (FCIP) or VEX_Port (FCIP with Fibre Channel routing).
NO.8 A customer needs to migrate data to a new database environment. They need to make a
physical copy of their data that can be presented to the new environment with the highest level of
availability. Which form of replication should the customer use?
A. backups to disk
B. snapshots
C. clones
D. asynchronous replication
Answer: C
HP certification HP0-J66 HP0-J66 examen HP0-J66
Explanation:
Incorrect: Not B:A storage snapshot is a set of reference markers, or pointers, to data stored on a
disk drive, on a tape, or in a storage area network (SAN). A snapshot is something like a detailed
table of contents, but it is treated by the computer as a complete data backup. Snapshots
streamline access to stored data and can speed up the process of data recovery. There are two main
types of storage snapshot, called the copy-on-write (or low-capacity) snapshot and the split-mirror
snapshot. Utilities are available that can automatically generate either type.
9. A customer needs to replicate data from a remote location to an HP StoreOnce B6200 Backup.
A. The HP D2D sizing tool should be usedto size link speed and understand concurrency restraints.
B. Concurrency control should be used if the replication isnot run at the same times as backups and
housekeeping jobs.
C. Separate replication jobs should be created for each datatype.
D. Backups and housekeeping jobs should berun in thereplication window.
Answer: A
HP certification HP0-J66 certification HP0-J66 HP0-J66 HP0-J66
Explanation:
The replication best practices that apply to HP StoreOnce D2D Backup Systems are
equally as valid for the HP B6200 StoreOnce Backup System.
Best practices include:
*Use the Sizing tool to size replication link speed and understand replication concurrency
restraints.
Reference; HP B6200 Backup System, Recommended Configuration Guidelines
10. In which HP rack is the factory Integration of an HP StoreServ 7000 supported?
A. HP 5642 rack
B. HP G3 rack
C. HP 10000 rack
D. HPV142 rack
Answer: C
HP examen HP0-J66 HP0-J66 HP0-J66 examen
Explanation:
Choose Racking Options The HP 3PAR StoreServ 7000 is compatible with most industry standard
4-post EIA 19 inch racks with square mounting holes, including the HP Intelligent Series Rack and
the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in
a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HP Intelligent Series Rack.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification HP HP0-J66, et aussi une meilleure assurance du succès du test HP0-J66. Vous choisissez Pass4Test, vous choisissez le succès.
