Le programme de formation Juniper JN0-321 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Juniper JN0-321, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Juniper JN0-321 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Juniper JN0-321 sans aucune doute.
Bien qu'il ne soit pas facile à réussir le test Juniper JN0-321, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Juniper JN0-321, mais encore à vous aider d'économiser votre temps.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Juniper après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Juniper JN0-321. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Code d'Examen: JN0-321
Nom d'Examen: Juniper (DX, Associate(JNCIA-DX))
Questions et réponses: 120 Q&As
Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Juniper JN0-321. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Juniper JN0-321.
JN0-321 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-321.html
NO.1 Which HTTP return code should be verified when configuring the cache?
A. 302
B. 200
C. 304
D. 501
Answer: B
certification Juniper certification JN0-321 JN0-321 examen certification JN0-321
NO.2 Which three statements are correct using nitro.apprule on any web application? (Choosethree.)
A. Nitro.apprule provides advance http security on HTTPS applications.
B. Nitro.apprule provides caching on HTTP and HTTPS applications.
C. Nitro.apprule provides transaction guarantee on HTTP application.
D. Nitro.apprule improves client response time on HTTP applications.
E. Nitro.apprule provides advanced authentication on HTTPS applications.
Answer: ABD
Juniper certification JN0-321 certification JN0-321 certification JN0-321
NO.3 In the Juniper DX Unified Failover configuration, the VMAC is active on whichdevice(s)?
A. The Standby DX(s)
B. The Master DX and the Active Server(s)
C. The Master DX
D. All DXs in the Unified Failover group
Answer: C
certification Juniper JN0-321 certification JN0-321 JN0-321 JN0-321 examen
NO.4 What do you need to upgrade the DXOS?
A. an upgrade .tar file placed on your SCP server
B. an upgrade CD provided by your Juniper Networks representative
C. an upgrade .pac file placed on your TFTP or SCP server
D. an upgrade .gz file placed on your FTP server
Answer: C
Juniper examen certification JN0-321 JN0-321
NO.5 An enterprise has an internal web application that needs stickiness managed by aCluster. All
employeesaccess the application through a proxy. What is the correct sticky load balancing policy?
A. url persistency
B. cookie persistency
C. urlhash
D. default persistency
Answer: B
certification Juniper certification JN0-321 JN0-321 examen JN0-321
NO.6 Which CLI command is used for analysis and troubleshooting of real time trafficcapture?
A. tcpdump
B. show server stats
C. tsdump
D. vmstat
Answer: A
certification Juniper JN0-321 JN0-321 examen JN0-321
NO.7 Which statement is true about "sticky" load balancing for Clusters?
A. The "clientip" setting does not apply to clusters, it only pertains to a Forwarder.
B. When set to "clientip" it uses the client's IP address to bind the client to a particular target server.
C. When set to "clientip" it ensures that all subsequent requests are directed to the same client that made
the initial request.
D. When set to "clientip" it allows a DX sticky cookie to be sent to and stored by the client based on the IP
address.
Answer: B
Juniper examen certification JN0-321 JN0-321 certification JN0-321 JN0-321 JN0-321
NO.8 When running SSL on a nonweb application, where are the secure connections made?
A. between the client and the DX appliance and between the DX appliance and the target servers
B. directly between the client and the target server(s)
C. between the client and the DX appliance
D. between the DX appliance and the target server(s)
Answer: C
certification Juniper JN0-321 JN0-321 JN0-321
NO.9 Which steps are required to use the Juniper DXs ActiveN functionality?
A. Enable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
enableActiveN, synchronize configuration.
B. Disable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
enableActiveN, synchronize configuration.
C. Enable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
selectActiveN load balancing policy, enable sticky.
D. Disable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
selectActiveN load balancing policy, enable sticky.
Answer: A
Juniper JN0-321 examen certification JN0-321
NO.10 Which AppRule type is used to configure 3G caching?
A. PTH
B. RS
C. RTH
D. PTC
Answer: A
certification Juniper JN0-321 examen certification JN0-321 JN0-321
NO.11 Your administrator wants to centralize logs from the DX appliance and Cluster. Whichtwo protocols
areavailable to export those logs? (Choose two.)
A. SMTP
B. syslog
C. SCP
D. TFTP
Answer: BC
Juniper examen certification JN0-321 JN0-321 examen JN0-321 examen
NO.12 Which system elements are exported when using the system snapshot feature?
A. tsdump, tcpdump, current debug and memory states
B. current memory states
C. system process data, system logs, system debug statistics and system passkeys
D. system software, users, configuration, licenses, app rules, SSL certificates and keys
Answer: D
Juniper certification JN0-321 JN0-321 JN0-321
NO.13 A health care organization has a Juniper DX placed in front of a web server. Theycurrently have
listensideSSL enabled to encrypt traffic from the client to the DX appliance. Due to privacyconcerns, they
havedecided to enable SSL from the client to the server for endtoend SSL. Which twosteps are required
toenable endtoend encryption? (Choose two).
A. Disable clientside SSL on the DX and enable Unified SSL.
B. Enable targetside SSL on the DX.
C. Configure a Redirector on the DX to redirect browsers to the HTTPS port.
D. Enable SSL on the web server.
Answer: BD
Juniper JN0-321 JN0-321 JN0-321 JN0-321
NO.14 An enterprise uses a Webtiered application that provides NTLM enduserauthentication.What is the
required Cluster option?
A. DSR
B. Connect Method
C. Connection Binding
D. Sticky Load Balancing
Answer: C
Juniper JN0-321 JN0-321
NO.15 Which two functions require the use of the CLI? (Choose two.)
A. running a tcpdump
B. adding a VLAN
C. adding a cluster
D. adding a target server
Answer: AB
certification Juniper JN0-321 JN0-321 examen JN0-321 certification JN0-321
NO.16 In which section of the WebUI does the administrator create and apply AppRules?
A. SLB
B. Cluster
C. Forwarder
D. Redirector
Answer: B
Juniper examen JN0-321 examen JN0-321 JN0-321 JN0-321 JN0-321
NO.17 Which protocols are used to export and import configurations?
A. TFTP or SCP
B. TFTP or SMTP
C. FTP or SCP
D. FTP or TFTP
Answer: A
Juniper JN0-321 certification JN0-321 certification JN0-321 JN0-321
NO.18 Which two are initial configuration steps using the console? (Choose two.)
A. Enable HTTPS for WebUI access.
B. Agree to the license.
C. Configure fullyqualified domain name.
D. Configure console port parameters.
Answer: BC
Juniper certification JN0-321 JN0-321 JN0-321
NO.19 Which two benefits does the Juniper DX provide? (Choose two.)
A. It offloads TCP connections from servers.
B. It spools email messages.
C. It offloads SSL from servers.
D. It compresses images.
Answer: AC
Juniper examen JN0-321 certification JN0-321 certification JN0-321
NO.20 In the WebUI, which method will determine if a Cluster target host is available?
A. Click Statistics > Cluster Groups
B. Click Dashboard > Cluster group name
C. Click Services > Cluster Groups
D. Click Log > Audit
Answer: B
Juniper JN0-321 examen JN0-321 JN0-321 examen
Vous pouvez tout d'abord télécharger le démo Juniper JN0-321 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.
没有评论:
发表评论