Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat CompTIA PD1-001 est bien autorisé. Avec le certificat CompTIA PD1-001, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A CompTIA PD1-001.
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test CompTIA PD1-001.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test CompTIA PD1-001 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test CompTIA PD1-001.
Le programme de formation CompTIA PD1-001 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Code d'Examen: PD1-001
Nom d'Examen: CompTIA (CompTIA PDI+ Beta Exam)
Questions et réponses: 861 Q&As
PD1-001 Démo gratuit à télécharger: http://www.pass4test.fr/PD1-001.html
NO.1 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA examen PD1-001 examen PD1-001 PD1-001 examen certification PD1-001 certification PD1-001
NO.2 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
certification CompTIA PD1-001 examen PD1-001 certification PD1-001
NO.3 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA certification PD1-001 PD1-001 examen PD1-001 examen
NO.4 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD1-001 certification PD1-001 certification PD1-001 certification PD1-001 PD1-001
NO.5 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA PD1-001 PD1-001 examen PD1-001 examen
NO.6 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA examen PD1-001 certification PD1-001 PD1-001
NO.7 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA PD1-001 examen PD1-001
NO.8 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA PD1-001 certification PD1-001 PD1-001 examen
NO.9 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA certification PD1-001 PD1-001 examen PD1-001 PD1-001 examen
NO.10 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
certification CompTIA PD1-001 PD1-001 examen PD1-001 examen
NO.11 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA examen PD1-001 PD1-001 examen PD1-001
NO.12 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA certification PD1-001 PD1-001 PD1-001 examen certification PD1-001 PD1-001
NO.13 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA PD1-001 examen certification PD1-001 PD1-001
NO.14 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
certification CompTIA PD1-001 examen PD1-001 certification PD1-001 certification PD1-001
NO.15 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
certification CompTIA PD1-001 PD1-001
NO.16 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA PD1-001 PD1-001
NO.17 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA examen PD1-001 PD1-001 PD1-001
NO.18 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD1-001 examen PD1-001 PD1-001
NO.19 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD1-001 PD1-001 examen certification PD1-001
NO.20 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD1-001 certification PD1-001
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
没有评论:
发表评论