Après une longue attente, les documentations de test SNIA S10-300 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test SNIA S10-300 à la première fois.
Le test Certificat SNIA S10-300 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification SNIA S10-300. Vous allez prendre toutes essences du test SNIA S10-300 dans une courte terme.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification SNIA S10-300. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test SNIA S10-300. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Finalement, la Q&A SNIA S10-300 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test SNIA S10-300 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification SNIA, vous aurez un meilleur salaire et une plus grande space à se développer.
Code d'Examen: S10-300
Nom d'Examen: SNIA (Snia Storage Architect-Assessment,Planning and Design)
Questions et réponses: 85 Q&As
S10-300 Démo gratuit à télécharger: http://www.pass4test.fr/S10-300.html
NO.1 What are three key advantages of deploying a director-based solution over a mesh of switches?
(Choose three.)
A. lower cost
B. consistent latency
C. improved availability
D. increased hop count
E. ease of management
Answer: BCE
SNIA S10-300 certification S10-300 S10-300
NO.2 What is the primary objective of the storage capacity planning process?
A. To demonstrate the effects of changes in storage service levels.
B. To reach agreement with application representatives and management over the storage requirements.
C. To produce a capacity plan at agreed intervals which fits into the business planning cycle, e.g. the
financial year.
D. To calculate the effects on ILM service levels, array and fabric utilization of the estimated demand over
the period of the planning horizon.
Answer: C
SNIA examen certification S10-300 certification S10-300 certification S10-300 S10-300 examen
NO.3 When planning a NAS solution, which two sub-processes are associated with NAS Service Capacity
Management? (Choose two.)
A. Define future requirements.
B. Manage peak demand for NAS services.
C. Establish IOPS monitoring and exception thresholds.
D. Run reports on the storage and network utilization and IOPS of components.
Answer: BC
SNIA certification S10-300 certification S10-300
NO.4 What is the goal of a SAN designed with no single point of failure?
A. to provide redundant paths to data
B. to have a good data backup system
C. to minimize unexpected loss of data access
D. to have clustered servers so that one is always available
Answer: C
certification SNIA S10-300 examen S10-300 certification S10-300
NO.5 Your SAN currently has eight server ports and eight disk ports on one 16 port switch. Each server port
requires 80 MB/s of one-way bandwidth, spread out evenly among the storage devices. The customer
would like to add 28 server ports along with 28 disk ports. Each server will evenly distribute its traffic on
each disk. Using 16 port 1 Gb switches, which topology should you select to minimize the number of
switches and ISLs required?
A. star
B. full mesh
C. core-edge
D. point-to-point
Answer: C
SNIA examen S10-300 S10-300 examen S10-300
NO.6 A customer is using host based virtualization to mirror critical data between two vendors disk arrays.
Which two scenarios are true? (Choose two)
A. The host can use the same HBA to connect to both arrays
B. The customer can adhere to either vendors SAN design rules
C. The customer must adhere to both vendors SAN design rules
D. The host must use different HBAs with different firmware to connect to each array
Answer: CD
SNIA S10-300 examen certification S10-300 S10-300
NO.7 You have been tasked with identifying upgrade options for your networked storage. Which two should
you do? (Choose two.)
A. Only select hardware and software that is SMI-S compliant.
B. Share all received information openly with all vendors involved.
C. Understand needs and requirements as well capabilities of your existing technology.
D. Enlist legal advice or support of your purchasing department when creating RFI, RFP, and RFQs.
Answer: CD
SNIA S10-300 S10-300 certification S10-300
NO.8 A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a
solution designed which allows access from 32 servers with no single point of failure. Which number of
HBAs and the associated throughput, provide server access to the disk subsystem?
A. 16 HBAs, 75 MB/s
B. 32 HBAs, 90 MB/s
C. 64 HBAs, 25 MB/s
D. 64 HBAs, 50 MB/s
Answer: C
certification SNIA S10-300 S10-300 examen S10-300 examen S10-300
NO.9 A customer has a terabyte database and is required to back up the data daily. The SLA has allotted 6
hours for completion of the backup from 7:00 P.M. until 1:00 A.M. However, the customer has a tape
library with only five SDLT tape devices running at native speeds of 40 GB/hour. Which two should you do
to successfully meet the expected SLA requirements? (Choose two.)
A. interleave data streams
B. enable server-based compression
C. use multiple data streams across multiple devices
D. prioritize the schedule to launch during periods of greatest inactivity
Answer: AC
SNIA S10-300 S10-300 examen certification S10-300 S10-300 examen
NO.10 When implementing a high performance NAS solution you must check for which two items? (Choose
two.)
A. Ensure the network is full duplex.
B. Ensure that hosts have 100Mb NICs.
C. Ensure the network is at least 100Mb.
D. Ensure routers are configured for OSPF.
Answer: AC
SNIA examen S10-300 examen S10-300 examen
Pass4Test possède un l'outil de formation particulier à propos de test SNIA S10-300. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation SNIA S10-300 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
没有评论:
发表评论