Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Citrix 1Y0-350 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Citrix 1Y0-350 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Citrix 1Y0-350.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Vous aurez une assurance 100% à réussir le test Citrix 1Y0-350 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Code d'Examen: 1Y0-350
Nom d'Examen: Citrix (Citrix NetScaler 10 Essentials and Networking)
Questions et réponses: 126 Q&As
Code d'Examen: 1Y0-370
Nom d'Examen: Citrix (Designing, Deploying and Managing Citrix XenMobile Solutions)
Questions et réponses: 67 Q&As
Vous allez choisir Pass4Test après essayer une partie de Q&A Citrix 1Y0-370 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Citrix 1Y0-370.
Votre vie changera beaucoup après d'obtenir le Certificat de Citrix 1Y0-370. Tout va améliorer, la vie, le boulot, etc. Après tout, Citrix 1Y0-370 est un test très important dans la série de test Certification Citrix. Mais c'est pas facile à réussir le test Citrix 1Y0-370.
La Q&A Citrix 1Y0-350 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Citrix 1Y0-350.
On peut voir que beaucoup de candidats ratent le test Citrix 1Y0-370 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Citrix 1Y0-370 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Citrix 1Y0-370, Pass4Test peut offrir les Q&As des autres test Certification IT.
1Y0-350 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-350.html
NO.1 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix certification 1Y0-350 1Y0-350
NO.2 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A
Citrix examen 1Y0-350 1Y0-350 examen certification 1Y0-350 1Y0-350
NO.3 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
certification Citrix certification 1Y0-350 1Y0-350 examen 1Y0-350 examen certification 1Y0-350
NO.4 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A
certification Citrix 1Y0-350 certification 1Y0-350 1Y0-350
NO.5 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix examen certification 1Y0-350 1Y0-350 1Y0-350 examen
NO.6 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B
Citrix examen 1Y0-350 certification 1Y0-350 1Y0-350 1Y0-350 examen
NO.7 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B
Citrix examen 1Y0-350 1Y0-350 examen certification 1Y0-350 1Y0-350 examen
NO.8 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix examen 1Y0-350 certification 1Y0-350 1Y0-350
没有评论:
发表评论